EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Elevated Temperature on Mechanical Properties and Shielding Performance of Magnetite–Serpentine Radiation-Proof Concrete

Dan Wu, Zehua Liu, Zhenfu Chen, Qiongfang Wu, Qiuwang Tao iD

Materials · 06.06.2025 · 18 (12) · 2686

DOI: 10.3390/ma18122686 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.06.2025. Verfasst von Dan Wu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Resources Environment and Safety Engineering, University of South China, Hengyang 421001, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhenfu Chen, National Key Research and Development Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High temperatures can induce a range of physical and chemical alterations in radiation-protective concrete, potentially compromising its strength and significantly diminishing its radiation shielding capabilities. Therefore, it is very important to study the high temperature performance of radiation-proof concrete to ensure its safety and stability in extreme environment. In this study, the magnetite–serpentine radiation-proof concrete is designed with magnetite as coarse aggregate, serpentine as fine aggregate, and Portland cement and granulated blast furnace slag as mixture. The apparent characteristics, mass loss, ultrasonic pulse velocity, mechanical properties, shielding performance, and correlation of this concrete were analyzed through experiments. The results show that the damage degree and relative wave velocity have a good correlation in evaluating the relative mass loss, linear attenuation coefficient, compressive strength, and tensile strength after high temperatures. The compressive strength at 800 °C is 12.2 MPa and the splitting tensile strength is 0.48 MPa; the linear attenuation coefficient of specimen at 800 °C is reduced to 80.9% of that at normal temperature. Meanwhile, penetrating cracks appeared at 600 °C and spalling phenomenon appeared at 800 °C, and better thermal stability and favorable mechanical properties and shielding performance also occurred; thus, suitable radioactive and high temperature environment was determined. The results could provide scientific guidance for nondestructive testing and performance evaluation of shielding structure materials.

Schlagwörter

Stichwörter der Autor:innen

high temperaturemagnetite–serpentine concretemechanical propertiesshielding performance

Autor:innen und Institutionen

  • School of Resources Environment and Safety Engineering, University of South China, Hengyang 421001, China.
  • School of Civil Engineering, University of South China, Hengyang 421001, China.
  • China Nuclear Industry Key Laboratory of High-Performance Concrete, University of South China, Hengyang 421001, China.
  • Hunan Provincial Key Laboratory of High-Performance Special Concrete, University of South China, Hengyang 421001, China.

ORCID-Profile: Qiuwang Tao

Förderung

  • Zhenfu Chen
  • National Key Research and Development Project

Zitieren

APA

Wu, D., Liu, Z., Chen, Z., Wu, Q., & Tao, Q. (2025). Effect of Elevated Temperature on Mechanical Properties and Shielding Performance of Magnetite–Serpentine Radiation-Proof Concrete. Materials, 18(12), 2686. https://doi.org/10.3390/ma18122686

Vancouver

Wu D, Liu Z, Chen Z, Wu Q, Tao Q. Effect of Elevated Temperature on Mechanical Properties and Shielding Performance of Magnetite–Serpentine Radiation-Proof Concrete. Materials. 2025;18(12):2686. doi:10.3390/ma18122686

BibTeX
@article{Wu2025,
  author = {Wu, Dan and Liu, Zehua and Chen, Zhenfu and Wu, Qiongfang and Tao, Qiuwang},
  title = {Effect of Elevated Temperature on Mechanical Properties and Shielding Performance of Magnetite–Serpentine Radiation-Proof Concrete},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {12},
  pages = {2686},
  doi = {10.3390/ma18122686}
}
Kostenlos starten →