EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Symmetric and Asymmetric Semi-Metallic Gasket Cores and Their Effect on the Tightness Level of the Bolted Flange Joint

Przemysław Jaszak iD, Rafał Grzejda iD

Materials · 04.06.2025 · 18 (11) · 2624

DOI: 10.3390/ma18112624 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.06.2025. Verfasst von Przemysław Jaszak und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical and Power Engineering, Wroclaw University of Science Technology, Wybrzeze Stanislawa Wyspianskiego St. 27, 50-370 Wroclaw, Pola…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper presents the effect of the symmetric and asymmetric semi-metallic gasket core shape on the tightness level in bolted flange joints. Experimental tests, as well as numerical calculations based on the finite element method, revealed that the asymmetric gasket core provides a higher strain on the sealing graphite layer and leads to a more uniform distribution of strain on the particular ridges of the core. Furthermore, the leakage rate of the asymmetric gasket was reduced by approximately 60% compared to the symmetric gasket. It was also observed that the uniformity of pressure and strain distribution in a gasket with an asymmetric core occurs over about 80% of the gasket width. The leakage reduction effect in a flange joint sealed with a gasket with an asymmetric core was theoretically explained. As shown, the main leakage flows through the porous structure of the graphite layer, while the leakage path at the interface between the metal rough profile and the graphite layer is several orders of magnitude smaller.

Schlagwörter

Stichwörter der Autor:innen

bolted flange jointsemi-metallic gaskettightness level

Autor:innen und Institutionen

  • Faculty of Mechanical and Power Engineering, Wroclaw University of Science Technology, Wybrzeze Stanislawa Wyspianskiego St. 27, 50-370 Wroclaw, Poland.
  • Faculty of Mechanical Engineering and Mechatronics, West Pomeranian University of Technology in Szczecin, 19 Piastow Ave., 70-310 Szczecin, Poland.

ORCID-Profile: Przemysław Jaszak, Rafał Grzejda

Zitieren

APA

Jaszak, P., & Grzejda, R. (2025). Symmetric and Asymmetric Semi-Metallic Gasket Cores and Their Effect on the Tightness Level of the Bolted Flange Joint. Materials, 18(11), 2624. https://doi.org/10.3390/ma18112624

Vancouver

Jaszak P, Grzejda R. Symmetric and Asymmetric Semi-Metallic Gasket Cores and Their Effect on the Tightness Level of the Bolted Flange Joint. Materials. 2025;18(11):2624. doi:10.3390/ma18112624

BibTeX
@article{Jaszak2025,
  author = {Jaszak, Przemysław and Grzejda, Rafał},
  title = {Symmetric and Asymmetric Semi-Metallic Gasket Cores and Their Effect on the Tightness Level of the Bolted Flange Joint},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {11},
  pages = {2624},
  doi = {10.3390/ma18112624}
}
Kostenlos starten →