Impact of Macrotexture and Microtexture on the Skid Resistance of Asphalt Pavement Using Three-Dimensional (3D) Reconstruction and Printing Technology
Materials · 02.06.2025 · 18 (11) · 2597
DOI: 10.3390/ma18112597 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 02.06.2025. Verfasst von Fucheng Guo und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Road & Bridge and Underground Engineering of Gansu Province, Lanzhou Jiaotong University, Lanzhou 730070, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gansu Science and Technology Major Project, Gansu University Teacher Innovation Funding Project, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
In this study, the feasibility of using three-dimensional (3D) printing technology to investigate the impact of macrotexture and microtexture on the skid resistance of asphalt pavement was verified. The macrotexture characteristics of the five types of real asphalt mixtures were captured, reconstructed, and printed. The comparison analysis of the skid resistance between the pavement and printed specimens was conducted, and the correlations and contribution proportions of the macrotexture and microtexture on skid resistance were also calculated. Results show that five printed asphalt mixtures present good consistency in the microtexture with a roughness of about 100 nm. The impact of thin water film on the skid resistance is insignificant for real asphalt mixtures, while it is significant for printed mixtures. The printed specimens under dry conditions show a similar British pendulum number (BPN) with the real pavement specimens under wet conditions, while the BPN under wet conditions for printed specimens are much smaller than the real ones but follows a similar variation trend. Mean profile depth (MPD) values of four printed asphalt concrete (AC) mixtures are well linearly correlated with their BPN under dry and wet conditions, especially for wet conditions with the R2 of 0.91. The contribution proportion of macrotexture to the skid resistance is nearly 90% for the dry condition and about 50% for the wet condition.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Road & Bridge and Underground Engineering of Gansu Province, Lanzhou Jiaotong University, Lanzhou 730070, China.
- Key Laboratory of Intelligent Construction and Maintenance of CAAC, Chang'an University, Xi'an 710064, China.
- Key Laboratory for Special Area Highway Engineering of Ministry of Education, Chang'an University, Xi'an 710064, China.
- Department of Civil Engineering, University of Ottawa, 800 King Edward Ave, Ottawa, ON K1N 6N5, Canada.
ORCID-Profile: Fucheng Guo, Jiupeng Zhang, Tengfei Yao, Di Wang
Förderung
- Gansu Science and Technology Major Project
- Gansu University Teacher Innovation Funding Project
- Fundamental Research Funds for the Central Universities
- Fundamental Research Funds for the Central Universities, CHD
Zitieren
APA
Guo, F., Zhang, J., Pei, J., He, H., Yao, T., & Wang, D. (2025). Impact of Macrotexture and Microtexture on the Skid Resistance of Asphalt Pavement Using Three-Dimensional (3D) Reconstruction and Printing Technology. Materials, 18(11), 2597. https://doi.org/10.3390/ma18112597
Vancouver
Guo F, Zhang J, Pei J, He H, Yao T, Wang D. Impact of Macrotexture and Microtexture on the Skid Resistance of Asphalt Pavement Using Three-Dimensional (3D) Reconstruction and Printing Technology. Materials. 2025;18(11):2597. doi:10.3390/ma18112597
BibTeX
@article{Guo2025,
author = {Guo, Fucheng and Zhang, Jiupeng and Pei, Jianzhong and He, Haiqi and Yao, Tengfei and Wang, Di},
title = {Impact of Macrotexture and Microtexture on the Skid Resistance of Asphalt Pavement Using Three-Dimensional (3D) Reconstruction and Printing Technology},
journal = {Materials},
year = {2025},
volume = {18},
number = {11},
pages = {2597},
doi = {10.3390/ma18112597}
}
EUVIMED