EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mg–Zn–Ca Alloy with Ultra-High Ductility and Strength Processed by Screw Rolling

Haoran Zheng, Weitao Sun, Lijun Deng, Li Zhao, Kwang Seon Shin iD, Jian Zhang iD

Materials · 01.06.2025 · 18 (11) · 2586

DOI: 10.3390/ma18112586 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.06.2025. Verfasst von Haoran Zheng und 5 weiteren Autor:innen. Beteiligte Einrichtung: Aerospace and Mechanical College, Shandong University of Aeronautics, Binzhou 256600, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shandong Province, Shandong University of Aeronautics Doctoral Research Initiation Fund Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mg alloys are highly attractive for biodegradable surgical clips because of their low density and good biocompatibility; however, their limited strength and ductility restrict their widespread application. To overcome this limitation, this study employed screw rolling (SR) to produce a Mg–3Zn–0.2Ca alloy with a fine microstructure and an average grain size of 1.6 µm. Experimental results showed that the SR process improved the comprehensive tensile properties of the alloy, increasing the yield strength, ultimate tensile strength, and elongation from 192.6, 234.4 MPa, and 21.7% for the pre-extruded alloy to 252.3, 289 MPa, and 39.5%, respectively. Quantitative analysis of the strengthening behaviour identified grain refinement as the primary strengthening mechanism, along with considerable contributions from Orowan and dislocation strengthening. The ultra-high-tensile ductility was primarily attributed to the low internal stress, nano-sized precipitates, texture weakening, and activation of multiple slip systems. These findings provide a strategy for simultaneously increasing the ductility and strength of Mg alloys and lay a foundation for applying them as biodegradable clips.

Schlagwörter

Stichwörter der Autor:innen

Mg–Zn–Ca alloymechanical propertiesmicrostructureprecipitationscrew rolling

Autor:innen und Institutionen

  • Aerospace and Mechanical College, Shandong University of Aeronautics, Binzhou 256600, China.
  • Shandong Provincial Key Laboratory of Advanced Technology and Equipment for Laser Additive Manufacturing, Binzhou 256600, China.
  • Shandong Key Laboratory of Advanced Engine Piston Assembly, Binzhou 256600, China.
  • Magnestum Technology lnnovation Center, School of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea.

ORCID-Profile: Kwang Seon Shin, Jian Zhang

Förderung

  • Natural Science Foundation of Shandong Province
  • Shandong University of Aeronautics Doctoral Research Initiation Fund Project

Zitieren

APA

Zheng, H., Sun, W., Deng, L., Zhao, L., Shin, K. S., & Zhang, J. (2025). Mg–Zn–Ca Alloy with Ultra-High Ductility and Strength Processed by Screw Rolling. Materials, 18(11), 2586. https://doi.org/10.3390/ma18112586

Vancouver

Zheng H, Sun W, Deng L, Zhao L, Shin KS, Zhang J. Mg–Zn–Ca Alloy with Ultra-High Ductility and Strength Processed by Screw Rolling. Materials. 2025;18(11):2586. doi:10.3390/ma18112586

BibTeX
@article{Zheng2025,
  author = {Zheng, Haoran and Sun, Weitao and Deng, Lijun and Zhao, Li and Shin, Kwang Seon and Zhang, Jian},
  title = {Mg–Zn–Ca Alloy with Ultra-High Ductility and Strength Processed by Screw Rolling},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {11},
  pages = {2586},
  doi = {10.3390/ma18112586}
}
Kostenlos starten →