EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A New Fractional-Order Constitutive Model and Rough Design Method for Fluid-Type Inerters

Yandong Chen, Ning Chen iD

Materials · 29.05.2025 · 18 (11) · 2556

DOI: 10.3390/ma18112556 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.05.2025. Verfasst von Yandong Chen und 1 weiteren Autor:innen. Beteiligte Einrichtung: College of Intelligent Equipment Engineering, Wuxi Taihu University, Wuxi 214064, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The understanding and application of fluid-type inerters by scholars have been on the rise. However, due to their intricate multiphase mechanical properties, existing models still have considerable room for improvement. This study presents two fractional-order models and conducts parameter identification by integrating them with classical experimental data. The first model is an independent fractional-order model. In comparison with traditional models, it demonstrates significantly higher fitting accuracy in frequency regions beyond the ultra-low frequency range. The second model is a segmented fractional-order model, which determines segments according to critical frequencies. Although this model enhances the overall fitting accuracy, it also leads to increased complexity. To tackle this complexity issue, a rough design strategy is proposed to minimize the critical frequency. Research indicates that under such a strategy, the inertial effect dominates the behavior of the fluid inerter. Even when the independent fractional-order model is used, a high fitting accuracy can be achieved. Consequently, by designing the structural parameters and fluid medium of the fluid inerter based on the rough design strategy, the model can be simplified. Moreover, compared with traditional nonlinear inerter models, the transfer function and eigenvalue analysis methods can be effectively applied. This enables the acquisition of more comprehensive theoretical research results, thereby greatly facilitating theoretical analysis.

Schlagwörter

Stichwörter der Autor:innen

fluid-type inerterfractional-order inerterfractional-order modelmultiphase mechanical characteristics

Autor:innen und Institutionen

  • College of Intelligent Equipment Engineering, Wuxi Taihu University, Wuxi 214064, China.
  • College of Mechanical and Electronic Engineering, Nanjing Forestry University, Nanjing 210037, China.

ORCID-Profile: Ning Chen

Zitieren

APA

Chen, Y., & Chen, N. (2025). A New Fractional-Order Constitutive Model and Rough Design Method for Fluid-Type Inerters. Materials, 18(11), 2556. https://doi.org/10.3390/ma18112556

Vancouver

Chen Y, Chen N. A New Fractional-Order Constitutive Model and Rough Design Method for Fluid-Type Inerters. Materials. 2025;18(11):2556. doi:10.3390/ma18112556

BibTeX
@article{Chen2025,
  author = {Chen, Yandong and Chen, Ning},
  title = {A New Fractional-Order Constitutive Model and Rough Design Method for Fluid-Type Inerters},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {11},
  pages = {2556},
  doi = {10.3390/ma18112556}
}
Kostenlos starten →