Design of a Superhydrophobic Photothermal Shape-Memory Material Based on Carbon-Nanotubes-Doped Resin for Anti-Icing/De-Icing Applications
Materials · 28.05.2025 · 18 (11) · 2540
DOI: 10.3390/ma18112540 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.05.2025. Verfasst von Yingcheng Zhao und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Astronautics, Harbin Institute of Technology, Harbin 150080, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Laboratory of Icing and Anti/De-icing, Key Laboratory of Cross-Domain Flight Interdisciplinary Technology, National Natural Science Foundation of China.
Abstract (Originalsprache)
Icing on power lines and wings can cause serious economic damage and safety hazards. While superhydrophobic materials show promise for anti-icing applications, their passive anti-icing mechanisms require external energy activation, highlighting the need for the development of active de-icing materials with energy-to-heat conversion capabilities. Here, we developed three photothermal superhydrophobic shape-memory polymers with anti-icing performance (PSSPs), with 3%, 5%, and 7% CNT doping ratios, through a two-step process: resin preparation and laser-processing modification. The results showed that all samples presented good superhydrophobic properties. In addition, the tested materials demonstrated good shape-memory performance (recovery rates were close to 100%). They also showed excellent de-icing performance. Owing to the simplicity of the fabrication process, the material is suitable for mass production. The synergistic interplay between superhydrophobicity and photothermal activation endows the material with dual-functional icephobic performance, demonstrating practical applicability in industrial cryogenic environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Astronautics, Harbin Institute of Technology, Harbin 150080, China.
- Centre for Composite Materials and Structures, Harbin Institute of Technology, Harbin 150080, China.
- School of Safety Engineering, Shenyang Aerospace University, Shenyang 110136, China.
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore 639798, Singapore.
ORCID-Profile: Wei Tong
Förderung
- Key Laboratory of Icing and Anti/De-icing
- Key Laboratory of Cross-Domain Flight Interdisciplinary Technology
- National Natural Science Foundation of China
Zitieren
APA
Zhao, Y., Tian, P., Li, X., Gai, D., & Tong, W. (2025). Design of a Superhydrophobic Photothermal Shape-Memory Material Based on Carbon-Nanotubes-Doped Resin for Anti-Icing/De-Icing Applications. Materials, 18(11), 2540. https://doi.org/10.3390/ma18112540
Vancouver
Zhao Y, Tian P, Li X, Gai D, Tong W. Design of a Superhydrophobic Photothermal Shape-Memory Material Based on Carbon-Nanotubes-Doped Resin for Anti-Icing/De-Icing Applications. Materials. 2025;18(11):2540. doi:10.3390/ma18112540
BibTeX
@article{Zhao2025,
author = {Zhao, Yingcheng and Tian, Pei and Li, Xinlin and Gai, Di and Tong, Wei},
title = {Design of a Superhydrophobic Photothermal Shape-Memory Material Based on Carbon-Nanotubes-Doped Resin for Anti-Icing/De-Icing Applications},
journal = {Materials},
year = {2025},
volume = {18},
number = {11},
pages = {2540},
doi = {10.3390/ma18112540}
}
EUVIMED