EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advanced Constitutive Modeling of the Hot Deformation Behavior of Ni-Based Superalloys: Modified Kobayashi–Dodd and Khan–Huang–Liang Models with Experimental Validation

Ali Abd El-Aty iD, Yong Xu iD, Bandar Alzahrani, Alamry Ali, Abdallah Shokry iD

Materials · 26.05.2025 · 18 (11) · 2500

DOI: 10.3390/ma18112500 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.05.2025. Verfasst von Ali Abd El-Aty und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al Kharj 11942, Saudi Arabia. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Prince Sattam Bin Abdulaziz University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The hot deformation behavior of nickel-based superalloy 925 under different strain rates and elevated temperatures is inherently complex because of its strong dependence on strain, strain rate, and temperature. Constitutive modeling becomes essential to capture and predict this behavior accurately. In this study, two modified versions of the Kobayashi–Dodd (KD) and the Khan–Huang–Liang (KHL) models were introduced based on a detailed analysis of the alloy’s hot deformation characteristics, aiming to increase their predictive capabilities. The accuracy of the modified models, along with their original versions, was rigorously evaluated via the key statistical parameters correlation coefficient (R), average absolute relative error (AARE), and root mean square error (RMSE). The findings revealed that the modified KD and KHL models agreed well with the experimental data, indicating a remarkable fit. Both modified versions demonstrated high predictive accuracy, each achieving an R-value of 0.997. The modified KHL model reported an AARE of 3.07% and an RMSE of 7.49 MPa, whereas the modified KD model achieved an AARE of 3.19% and an RMSE of 6.64 MPa. These results confirm that the improved models offer superior performance in capturing the hot flow behavior of nickel-based superalloy 925, making them valuable tools for high-temperature forming process simulations and improving the overall performance of components. Furthermore, by enabling more efficient and optimized forming processes, these models contribute to sustainable manufacturing by minimizing material waste and optimizing energy usage, supporting global sustainability initiatives in line with SDG 9, SDG 12, and SDG 13.

Schlagwörter

Stichwörter der Autor:innen

Khan–Huang–LiangKobayashi–DoddSDGsconstitutive modelhot deformationsuperalloysustainability

Autor:innen und Institutionen

  • Department of Mechanical Engineering, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al Kharj 11942, Saudi Arabia.
  • Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China.
  • Department of Mechanical Engineering, Faculty of Engineering, Fayoum University, Fayoum 63514, Egypt.

ORCID-Profile: Ali Abd El-Aty, Yong Xu, Abdallah Shokry

Förderung

  • Prince Sattam Bin Abdulaziz University

Zitieren

APA

Abd El-Aty, A., Xu, Y., Alzahrani, B., Ali, A., & Shokry, A. (2025). Advanced Constitutive Modeling of the Hot Deformation Behavior of Ni-Based Superalloys: Modified Kobayashi–Dodd and Khan–Huang–Liang Models with Experimental Validation. Materials, 18(11), 2500. https://doi.org/10.3390/ma18112500

Vancouver

Abd El-Aty A, Xu Y, Alzahrani B, Ali A, Shokry A. Advanced Constitutive Modeling of the Hot Deformation Behavior of Ni-Based Superalloys: Modified Kobayashi–Dodd and Khan–Huang–Liang Models with Experimental Validation. Materials. 2025;18(11):2500. doi:10.3390/ma18112500

BibTeX
@article{AbdElAty2025,
  author = {Abd El-Aty, Ali and Xu, Yong and Alzahrani, Bandar and Ali, Alamry and Shokry, Abdallah},
  title = {Advanced Constitutive Modeling of the Hot Deformation Behavior of Ni-Based Superalloys: Modified Kobayashi–Dodd and Khan–Huang–Liang Models with Experimental Validation},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {11},
  pages = {2500},
  doi = {10.3390/ma18112500}
}
Kostenlos starten →