EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Phase Evolution During High-Energy Ball Milling and Annealing of Ti-Doped Mo-V-Si-B Alloys

Dennis Zang iD, Julia Becker iD, Ulf Betke iD, Georg Hasemann iD, Kateryna Khanchych iD, Bronislava Gorr, Manja Krüger iD

Materials · 26.05.2025 · 18 (11) · 2494

DOI: 10.3390/ma18112494 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.05.2025. Verfasst von Dennis Zang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials, Technologies and Mechanics (IWTM), Otto-von-Guericke University Magdeburg, Universitätsplatz 2, 39106 Magdeburg, Germany. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Federal Ministry for Economic Affairs and Climate Action, German Federal Ministry for Economic Affairs and Climate Action within the framework of the “RACe” project, “Disruptive Technologies and innovative Systems” program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Refractory metal-based Mo-Si-B alloys have long been considered the most promising candidates for replacing nickel-based superalloys in the aerospace and energy sector due to their outstanding mechanical properties and good oxidation of the Mo-silicide phases. In general, the addition of vanadium to Mo-Si-B alloys leads to a significant density reduction, while small amounts of titanium provide additional strengthening without changing the phase evolution within the Moss-Mo3Si-Mo5SiB2 phase field. In this work, high-energy ball milling studies on Mo-40V-9Si-8B, substituting both molybdenum and vanadium with 2 and 5 at. % Ti in all constituents, were performed to evaluate the potential milling parameters and investigate the effects of Ti doping on the milling characteristics and phase formation of these multicomponent alloys. After different milling durations, the powders were analysed with regard to their microstructure, particle size, oxygen concentration and microhardness. After heat treatment, the silicide phases (Mo,V)3Si and (Mo,V)5SiB2 precipitated homogeneously within a (Mo,V) solid solution matrix phase. Thermodynamic phase calculations using the CALPHAD method showed good agreement with the experimental phase compositions after annealing, confirming the stability of the observed microstructure.

Schlagwörter

Stichwörter der Autor:innen

Mo-Si-Bheat treatmentlattice parametermechanical alloyingmicrostructure

Autor:innen und Institutionen

  • Institute of Materials, Technologies and Mechanics (IWTM), Otto-von-Guericke University Magdeburg, Universitätsplatz 2, 39106 Magdeburg, Germany.
  • Institute for Applied Materials (IAM), Karlsruhe Institute of Technology (KIT), Kaiserstraße 12, 76131 Karlsruhe, Germany.

ORCID-Profile: Dennis Zang, Julia Becker, Ulf Betke, Georg Hasemann, Kateryna Khanchych, Manja Krüger

Förderung

  • German Federal Ministry for Economic Affairs and Climate Action
  • German Federal Ministry for Economic Affairs and Climate Action within the framework of the “RACe” project
  • “Disruptive Technologies and innovative Systems” program
  • DFG, German Research Foundation, as part of the “Major Research Instrumentation Programme”

Zitieren

APA

Zang, D., Becker, J., Betke, U., Hasemann, G., Khanchych, K., Gorr, B., & Krüger, M. (2025). Phase Evolution During High-Energy Ball Milling and Annealing of Ti-Doped Mo-V-Si-B Alloys. Materials, 18(11), 2494. https://doi.org/10.3390/ma18112494

Vancouver

Zang D, Becker J, Betke U, Hasemann G, Khanchych K, Gorr B, et al. Phase Evolution During High-Energy Ball Milling and Annealing of Ti-Doped Mo-V-Si-B Alloys. Materials. 2025;18(11):2494. doi:10.3390/ma18112494

BibTeX
@article{Zang2025,
  author = {Zang, Dennis and Becker, Julia and Betke, Ulf and Hasemann, Georg and Khanchych, Kateryna and Gorr, Bronislava and Krüger, Manja},
  title = {Phase Evolution During High-Energy Ball Milling and Annealing of Ti-Doped Mo-V-Si-B Alloys},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {11},
  pages = {2494},
  doi = {10.3390/ma18112494}
}
Kostenlos starten →