EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of the Impact of Epoxidized Soybean Oil on the Characteristics of Wood-Polymer Composites

Andrii Kulikov iD, Dmytro Kryvolapov, Kostyantyn Sukhyy, Oleksandr Yeromin iD, Marcel Fedak iD, Olena Prokopenko, Iryna Sukha, Angelo Musaio, Tomas Hrebik iD

Materials · 23.05.2025 · 18 (11) · 2455

DOI: 10.3390/ma18112455 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.05.2025. Verfasst von Andrii Kulikov und 8 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Manufacturing Technologies with the Seat in Presov, Technical University of Kosice, Bayerova 1, 08001 Presov, Slovakia. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: KEGA, VEGA, Cultural and Educational Grant Agency of the Ministry of Education, Research, Development, and Youth of the Slovak Republic.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of epoxidized soybean oil on the operational, technological, and physical and mechanical properties of composites based on high-density recycled polyethylene filled with wood floor was investigated. It has been shown that the introduction of epoxidized soybean oil in the amount of 0.5 wt.% into the wood-polymer composite (WPC) improves the physical, mechanical, and operational properties of the material: the Charpy impact strength (on notched samples) increases from 7.5 kJ/m2 to 20.0 kJ/m2, the bending strength increases from 31.6 MPa to 50.8 MPa, and the coefficient of linear thermal expansion decreases by 15%. With a further increase in the content of epoxidized soybean oil in the composite, its water absorption and technological shrinkage decrease, but its physical and mechanical properties deteriorate.

Schlagwörter

Stichwörter der Autor:innen

epoxidized soybean oilhigh-density polyethylenephysical and mechanical propertieswater absorptionwood-polymer composite

Autor:innen und Institutionen

  • Faculty of Manufacturing Technologies with the Seat in Presov, Technical University of Kosice, Bayerova 1, 08001 Presov, Slovakia.
  • Department of Ecology, Heat Transfer and Labor Protection, Faculty of Mechanical Engineering and Environmental Protection, Ukrainian State University of Science and Technologies, 49000 Dnipro, Ukraine.
  • Rectorate, Università degli Studi di Genova, 16167 Genova, Italy.

ORCID-Profile: Andrii Kulikov, Oleksandr Yeromin, Marcel Fedak, Tomas Hrebik

Förderung

  • KEGA, VEGA
  • Cultural and Educational Grant Agency of the Ministry of Education, Research, Development, and Youth of the Slovak Republic

Zitieren

APA

Kulikov, A., Kryvolapov, D., Sukhyy, K., Yeromin, O., Fedak, M., Prokopenko, O., Sukha, I., Musaio, A., & Hrebik, T. (2025). Study of the Impact of Epoxidized Soybean Oil on the Characteristics of Wood-Polymer Composites. Materials, 18(11), 2455. https://doi.org/10.3390/ma18112455

Vancouver

Kulikov A, Kryvolapov D, Sukhyy K, Yeromin O, Fedak M, Prokopenko O, et al. Study of the Impact of Epoxidized Soybean Oil on the Characteristics of Wood-Polymer Composites. Materials. 2025;18(11):2455. doi:10.3390/ma18112455

BibTeX
@article{Kulikov2025,
  author = {Kulikov, Andrii and Kryvolapov, Dmytro and Sukhyy, Kostyantyn and Yeromin, Oleksandr and Fedak, Marcel and Prokopenko, Olena and Sukha, Iryna and Musaio, Angelo and Hrebik, Tomas},
  title = {Study of the Impact of Epoxidized Soybean Oil on the Characteristics of Wood-Polymer Composites},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {11},
  pages = {2455},
  doi = {10.3390/ma18112455}
}
Kostenlos starten →