EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of the Microstructural and Mechanical Properties of Fiber-Reinforced Roller-Compacted Concrete Under High-Temperature Exposure

Murteda Ünverdi iD, Yahya Kaya, Naz Mardani, Ali Mardani iD

Materials · 22.05.2025 · 18 (11) · 2430

DOI: 10.3390/ma18112430 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.05.2025. Verfasst von Murteda Ünverdi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Faculty of Engineering, Bursa Uludag University, 16059 Bursa, Turkey. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 109 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bursa Uludağ Üni̇versi̇tesi̇, Scientific Research Projects (BAP) at Bursa Uludağ University, BAP.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the effects of different fiber types on improving the high-temperature performance of roller-compacted concrete (RCC) were comprehensively investigated. For this purpose, 60 mm long steel (S), polypropylene (PP), and environmentally sustainable waste steel (WS) fibers were incorporated into RCC at volumetric ratios of 0%, 0.25%, 0.50%, 0.75%, 1.00%, and 1.25%. The prepared specimens were exposed to controlled conditions at 25 °C (room temperature), 300 °C, 600 °C, and 900 °C, and the influence of thermal exposure on compressive strength and permeability characteristics was thoroughly evaluated. The findings revealed that high temperatures led to significant changes in the physical and mechanical properties of the concrete. Notably, at elevated temperatures such as 600 °C and 900 °C, S and WS fibers were found to reduce strength loss by limiting the propagation of microcracks within the concrete matrix. However, PP fibers were observed to lose their effectiveness at high temperatures due to melting in the range of approximately 160–170 °C, which negatively affected mechanical performance. One of this study’s key findings is that waste steel fibers offer a sustainable alternative while exhibiting comparable performance to conventional steel fibers. These results highlight the potential of recycling industrial waste to reduce environmental impact and lower overall costs.

Schlagwörter

Stichwörter der Autor:innen

compressive strengthfiber reinforcementhigh-temperature performancemicrostructureroller-compacted concrete

Autor:innen und Institutionen

  • Department of Civil Engineering, Faculty of Engineering, Bursa Uludag University, 16059 Bursa, Turkey.
  • Department of Mathematics Education, Faculty of Education, Bursa Uludag University, 16059 Bursa, Turkey.

ORCID-Profile: Murteda Ünverdi, Ali Mardani

Förderung

  • Bursa Uludağ Üni̇versi̇tesi̇
  • Scientific Research Projects (BAP) at Bursa Uludağ University
  • BAP

Zitieren

APA

Ünverdi, M., Kaya, Y., Mardani, N., & Mardani, A. (2025). Investigation of the Microstructural and Mechanical Properties of Fiber-Reinforced Roller-Compacted Concrete Under High-Temperature Exposure. Materials, 18(11), 2430. https://doi.org/10.3390/ma18112430

Vancouver

Ünverdi M, Kaya Y, Mardani N, Mardani A. Investigation of the Microstructural and Mechanical Properties of Fiber-Reinforced Roller-Compacted Concrete Under High-Temperature Exposure. Materials. 2025;18(11):2430. doi:10.3390/ma18112430

BibTeX
@article{nverdi2025,
  author = {Ünverdi, Murteda and Kaya, Yahya and Mardani, Naz and Mardani, Ali},
  title = {Investigation of the Microstructural and Mechanical Properties of Fiber-Reinforced Roller-Compacted Concrete Under High-Temperature Exposure},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {11},
  pages = {2430},
  doi = {10.3390/ma18112430}
}
Kostenlos starten →