Microstructure and Mechanical Properties of TiB2/TiC Particle Modified Al-Mg-Si Alloys Fabricated by Wire-Arc Additive Manufacturing
Materials · 27.04.2025 · 18 (9) · 1978
DOI: 10.3390/ma18091978 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 27.04.2025. Verfasst von Tao Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Material Science and Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Jiangxi Province of China, China Postdoctoral Science Foundation, Program of Qingjiang Excellent Young Talents of Jiangxi University of Science and Technology.
Abstract (Originalsprache)
TiB2 and TiC particles were separately introduced to modify the Al-Mg-Si alloy fabricated by wire-arc additive manufacturing (WAAM) to solve the problem of hot cracking. The results showed that modification of the Al-Mg-Si alloy with TiB2 or TiC particles completely suppressed the hot cracks found in commercial Al-Mg-Si alloys fabricated by WAAM due to the transformation from columnar grains to fine equiaxed grains with a mean diameter of approximately 10 μm. The ultimate strength and yield strength of the as-deposited Al-Mg-Si/TiB2 (AD-TB) and Al-Mg-Si/TiC (AD-TC) alloys were similar, but the elongation of the latter one was higher due to its low porosity. The ultimate strength (353.7 ± 5.0 MPa) and yield strength (309.7 ± 1.9 MPa) of the heat-treated Al-Mg-Si/TiC (HT-TC) alloy was significantly higher than those (300.8 ± 2.7 MPa and 256.2 ± 2.8 MPa, respectively) of the heat-treated Al-Mg-Si/TiB2 (HT-TB) alloy. The fatigue resistance of the HT-TC was better than that of the HT-TB due to less porosity and a more uniform distribution of TiC particles in the HT-TC alloy.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Material Science and Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China.
- Ningbo Boway Alloy Material Co., Ltd., Ningbo 315135, China.
- State Key Laboratory of Comprehensive Utilization of Low-Grade Refractory Gold Ores, Zijin Mining Group Co., Ltd., Xiamen 361000, China.
Förderung
- Natural Science Foundation of Jiangxi Province of China
- China Postdoctoral Science Foundation
- Program of Qingjiang Excellent Young Talents of Jiangxi University of Science and Technology
Zitieren
APA
Li, T., Chen, J., Zeng, L., Tuo, Z., Ren, J., Zheng, Z., & Wu, H. (2025). Microstructure and Mechanical Properties of TiB2/TiC Particle Modified Al-Mg-Si Alloys Fabricated by Wire-Arc Additive Manufacturing. Materials, 18(9), 1978. https://doi.org/10.3390/ma18091978
Vancouver
Li T, Chen J, Zeng L, Tuo Z, Ren J, Zheng Z, et al. Microstructure and Mechanical Properties of TiB2/TiC Particle Modified Al-Mg-Si Alloys Fabricated by Wire-Arc Additive Manufacturing. Materials. 2025;18(9):1978. doi:10.3390/ma18091978
BibTeX
@article{Li2025,
author = {Li, Tao and Chen, Jiqiang and Zeng, Lingpeng and Tuo, Zhanglong and Ren, Jieke and Zheng, Zuming and Wu, Hanlin},
title = {Microstructure and Mechanical Properties of TiB2/TiC Particle Modified Al-Mg-Si Alloys Fabricated by Wire-Arc Additive Manufacturing},
journal = {Materials},
year = {2025},
volume = {18},
number = {9},
pages = {1978},
doi = {10.3390/ma18091978}
}
EUVIMED