EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Laboratory Tests of Thermal Conductivity of Road Materials Using Two Measurement Methods

Jarosław Górszczyk iD, Konrad Malicki iD

Materials · 26.04.2025 · 18 (9) · 1970

DOI: 10.3390/ma18091970 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.04.2025. Verfasst von Jarosław Górszczyk und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Civil Engineering, Cracow University of Technology, 31-155 Cracow, Poland. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fundamental material parameter used in the thermal analysis of road pavement structures is the thermal conductivity. This parameter can be determined using various methods. The main objective of this paper is to compare and evaluate the thermal conductivity test results obtained using two different measurement methods. Thermal conductivity was determined using the steady-state and transient methods. The transient method is more cost-effective and faster but tends to produce a higher dispersion of results. In contrast, the steady-state method is more challenging to apply, particularly when testing large and heavy specimens of heterogeneous materials such as road pavement materials. For this reason, it is essential to assess the differences in results obtained by these two methods when applied to road materials. Two types of materials were tested in this study: an asphalt mixture and a cement concrete. The obtained results show statistically significant differences (α = 0.05), taking into account the two methods considered. The average difference can be estimated at 10% and 11% for asphalt mixtures and cement concretes, respectively. The obtained results are important for quantifying material parameters used in thermal and coupled thermal/structural analysis of pavement structures. This is particularly relevant in areas affected by urban heat islands and in road sections used as solar collectors.

Schlagwörter

Stichwörter der Autor:innen

asphalt mixturecement concreteheat fluxheat transfersteady-state thermal conductionsustainable road pavementthermal conductivitytransient heat conduction

Autor:innen und Institutionen

  • Faculty of Civil Engineering, Cracow University of Technology, 31-155 Cracow, Poland.

ORCID-Profile: Jarosław Górszczyk, Konrad Malicki

Zitieren

APA

Górszczyk, J., & Malicki, K. (2025). Comparative Laboratory Tests of Thermal Conductivity of Road Materials Using Two Measurement Methods. Materials, 18(9), 1970. https://doi.org/10.3390/ma18091970

Vancouver

Górszczyk J, Malicki K. Comparative Laboratory Tests of Thermal Conductivity of Road Materials Using Two Measurement Methods. Materials. 2025;18(9):1970. doi:10.3390/ma18091970

BibTeX
@article{Grszczyk2025,
  author = {Górszczyk, Jarosław and Malicki, Konrad},
  title = {Comparative Laboratory Tests of Thermal Conductivity of Road Materials Using Two Measurement Methods},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {9},
  pages = {1970},
  doi = {10.3390/ma18091970}
}
Kostenlos starten →