EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Situ Evaluation of Epoxy Self-Healing Coating by Encapsulated Linseed Oil in Poly(Urea–Formaldehyde–Melamine) Microcapsules

Lucas Henrique de Oliveira Souza iD, Michele Fedel iD, Fernando Cotting iD, Wagner Reis da Costa Campos iD

Materials · 23.04.2025 · 18 (9) · 1906

DOI: 10.3390/ma18091906 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.04.2025. Verfasst von Lucas Henrique de Oliveira Souza und 3 weiteren Autor:innen. Beteiligte Einrichtung: Nuclear Technology Development Center, Belo Horizonte 31270-901, MG, Brazil. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brasil (CAPES), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil (CAPES).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of self-healing coatings represents a promising approach to enhance the durability of metal substrates exposed to corrosive environments, demanding thorough in situ investigations. In this study, poly(urea–formaldehyde–melamine) (PUF) microcapsules containing linseed oil (LO) were synthesized via in situ polymerization to act as healing agents in protective coatings. The microcapsules were characterized using scanning electron microscopy (SEM), optical microscopy (OM), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The capsules exhibited a regular spherical morphology with an average diameter of 96 µm and an LO encapsulation efficiency of 81 wt%. TGA confirmed their thermal stability up to 200 °C, while FTIR verified the successful encapsulation of LO. For performance evaluation, 10 wt% of the microcapsules was incorporated into an epoxy matrix and applied to carbon steel. Corrosion resistance was evaluated using electrochemical impedance spectroscopy (EIS) in 0.1 mol/L of NaCl solution over 500 h. The coating with microcapsules exhibited a |Z|0.01 of 106 Ω·cm2, higher than the 104 Ω·cm2 observed for the coating without microcapsules, indicating improved barrier properties. Raman spectroscopy confirmed the auto-oxidation of LO at damaged areas, evidencing the self-healing mechanism. Although full barrier recovery was not achieved, the system effectively delayed corrosion progression.

Schlagwörter

Stichwörter der Autor:innen

Raman spectroscopycorrosion protectionelectrochemical impedance spectroscopyin situ characterizationlinseed oilorganic coatingspolymeric microcapsulesself-healing

Autor:innen und Institutionen

  • Nuclear Technology Development Center, Belo Horizonte 31270-901, MG, Brazil.
  • Department of Industrial Engineering, University of Trento, Via Sommarive n. 9, 38123 Trento, Italy.
  • Department of Chemical Engineering, Federal University of Minas Gerais, Belo Horizonte 31270-901, MG, Brazil.

ORCID-Profile: Lucas Henrique de Oliveira Souza, Michele Fedel, Fernando Cotting, Wagner Reis da Costa Campos

Förderung

  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brasil (CAPES)
  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil (CAPES)

Zitieren

APA

Souza, L. H. O., Fedel, M., Cotting, F., & Campos, W. R. D. C. (2025). In Situ Evaluation of Epoxy Self-Healing Coating by Encapsulated Linseed Oil in Poly(Urea–Formaldehyde–Melamine) Microcapsules. Materials, 18(9), 1906. https://doi.org/10.3390/ma18091906

Vancouver

Souza LHO, Fedel M, Cotting F, Campos WRDC. In Situ Evaluation of Epoxy Self-Healing Coating by Encapsulated Linseed Oil in Poly(Urea–Formaldehyde–Melamine) Microcapsules. Materials. 2025;18(9):1906. doi:10.3390/ma18091906

BibTeX
@article{Souza2025,
  author = {Souza, Lucas Henrique de Oliveira and Fedel, Michele and Cotting, Fernando and Campos, Wagner Reis da Costa},
  title = {In Situ Evaluation of Epoxy Self-Healing Coating by Encapsulated Linseed Oil in Poly(Urea–Formaldehyde–Melamine) Microcapsules},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {9},
  pages = {1906},
  doi = {10.3390/ma18091906}
}
Kostenlos starten →