EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Fe Content on Phase Behavior of Sm–Co–Fe Alloys During Solidification and Aging

Zhi Zhu, Yikun Fang, Wei Wu, Bo Zhao iD, Meng Zheng, Ming Lei, Jiashuo Zhang

Materials · 17.04.2025 · 18 (8) · 1854

DOI: 10.3390/ma18081854 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.04.2025. Verfasst von Zhi Zhu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Metallurgical Technology Institute, Central Iron and Steel Research Institute Co., Ltd., Beijing 100081, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National key research and development program of China, Major Program of Central Iron and Steel Research Institute R&D special fund, the Research and Application of Rare Earth Microalloying Technology in Steel Industry.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of different Fe contents on the phases of Sm–Co–Fe ternary alloys during solidification is investigated herein by melting the alloys using a non-consumable vacuum arc furnace. In particular, the phases of the Sm25.5CobalFex (x = 19, 21, 23, and 25 wt.%) alloys are investigated after solidification and aging. The results obtained from Cai Li’s modified Miedema model show a strong interaction between the Sm–Co alloy atoms. Additionally, the results obtained from the Toop geometric model show a strong interaction between the Sm–Co–Fe ternary alloy atoms, enabling the formation of intermetallic compounds. The experimental results show that when the Sm content is 25.5 wt.%, the SmCo5 phase gradually decreases as the Fe content increases and disappears when the Fe content is 25 wt.%. Thermodynamic calculations show that when the Fe content is 19 wt.%, there is a region where the SmCo5 and Sm2Co17 phases co-exist. As the Fe content increases, this region gradually decreases. For a 25 wt.% Fe content, the Sm2Co17 and SmCo5 two-phase region does not appear when the Sm content varies. The samples are aged at 1143 °C for 12 h, then melted and cut. The phase results obtained by scanning are consistent with the calculated results. In this study, the effect of each constituent element of Sm–Co–Fe ternary alloys on their solidification phases is investigated, providing a strong foundation for studying the 2:17-type Sm–Co magnetic materials obtained after melting and aging a five-element Sm–Co alloy.

Schlagwörter

Stichwörter der Autor:innen

Sm–Co–Fe alloysagingarc melting

Autor:innen und Institutionen

  • Metallurgical Technology Institute, Central Iron and Steel Research Institute Co., Ltd., Beijing 100081, China.
  • Division of Functional Materials, Central Iron and Steel Research Institute Co., Ltd., Beijing 100081, China.

ORCID-Profile: Bo Zhao

Förderung

  • The National key research and development program of China
  • Major Program of Central Iron and Steel Research Institute R&D special fund
  • the Research and Application of Rare Earth Microalloying Technology in Steel Industry
  • Major Program of Central Iron and Steel Research Institute R&D special fund

Zitieren

APA

Zhu, Z., Fang, Y., Wu, W., Zhao, B., Zheng, M., Lei, M., & Zhang, J. (2025). Effect of Fe Content on Phase Behavior of Sm–Co–Fe Alloys During Solidification and Aging. Materials, 18(8), 1854. https://doi.org/10.3390/ma18081854

Vancouver

Zhu Z, Fang Y, Wu W, Zhao B, Zheng M, Lei M, et al. Effect of Fe Content on Phase Behavior of Sm–Co–Fe Alloys During Solidification and Aging. Materials. 2025;18(8):1854. doi:10.3390/ma18081854

BibTeX
@article{Zhu2025,
  author = {Zhu, Zhi and Fang, Yikun and Wu, Wei and Zhao, Bo and Zheng, Meng and Lei, Ming and Zhang, Jiashuo},
  title = {Effect of Fe Content on Phase Behavior of Sm–Co–Fe Alloys During Solidification and Aging},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {8},
  pages = {1854},
  doi = {10.3390/ma18081854}
}
Kostenlos starten →