EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Molten Pool Flow and Porosity Defects in Laser–Tungsten Inert Gas (TIG) Welding of 4J36 Invar Steel

Sen Wu, Fei Zhao iD, Pengfei Wang, Shuili Gong, Zhisheng Wu

Materials · 16.04.2025 · 18 (8) · 1824

DOI: 10.3390/ma18081824 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.04.2025. Verfasst von Sen Wu und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Material Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Fundamental Research Program of Shanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Invar steel molten pool is characterized by low fluidity of the molten pool due to high tension, which hinders the escape of gases and exacerbates the formation of porosity defects. In this study, the influences of different welding process parameters, material properties, and U-groove on the flow behavior of the molten pool of laser–tungsten inert gas (TIG) hybrid welding of Invar steel are investigated by numerical simulation and high-speed photography. This research proposes effective measures to suppress porosity defects, such as optimizing process parameters and extending the existence time of the molten pool. In conclusion, this study systematically investigates the dynamic mechanism of the formation of welding defects in 4J36 Invar steel and provides important theoretical support for the optimization of the welding process of 4J36 Invar steel. The results indicate that controlling the laser power at 4–6 kW, welding speed at 0.5–1.0 m/min, and welding current at 150–170 A can stabilize the molten pool flow and keyhole and promote the molten pool flow and gas escape.

Schlagwörter

Stichwörter der Autor:innen

4J36 Invar steelflow fieldhigh-speed photographylaser–TIG hybrid weldingporosity defect

Autor:innen und Institutionen

  • College of Material Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China.
  • Shanxi Innovation Center of Metal Joining and Additive Manufacturing Technology, Taiyuan 030024, China.
  • Aviation Manufacturing Technology Research Institute of China, Beijing 100024, China.

ORCID-Profile: Fei Zhao

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China
  • Fundamental Research Program of Shanxi Province

Zitieren

APA

Wu, S., Zhao, F., Wang, P., Gong, S., & Wu, Z. (2025). Study on Molten Pool Flow and Porosity Defects in Laser–Tungsten Inert Gas (TIG) Welding of 4J36 Invar Steel. Materials, 18(8), 1824. https://doi.org/10.3390/ma18081824

Vancouver

Wu S, Zhao F, Wang P, Gong S, Wu Z. Study on Molten Pool Flow and Porosity Defects in Laser–Tungsten Inert Gas (TIG) Welding of 4J36 Invar Steel. Materials. 2025;18(8):1824. doi:10.3390/ma18081824

BibTeX
@article{Wu2025,
  author = {Wu, Sen and Zhao, Fei and Wang, Pengfei and Gong, Shuili and Wu, Zhisheng},
  title = {Study on Molten Pool Flow and Porosity Defects in Laser–Tungsten Inert Gas (TIG) Welding of 4J36 Invar Steel},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {8},
  pages = {1824},
  doi = {10.3390/ma18081824}
}
Kostenlos starten →