EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Cryogenic Treatment and Tempering Duration on the Microstructure and Mechanical Properties of Martensitic Stainless Steel 13Cr-2Ni-2Mo

Muhammad R R Fatih iD, Hou-Jen Chen iD, Hsin-Chih Lin

Materials · 14.04.2025 · 18 (8) · 1784

DOI: 10.3390/ma18081784 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.04.2025. Verfasst von Muhammad R R Fatih und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Road, Taipei 10617, Taiwan. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Martensitic stainless steel (MSS) is widely used in several parts of automobiles where high strength, hardness, and corrosion resistance are required. However, the metastability of retained austenite can transform into martensite under severe deformation, adversely affecting material properties. Cryogenic treatments (CTs) have been extensively employed in iron-based alloys for fastener application due to their advantageous effect. This study explores the heat treatment processes applied to 13Cr-2Ni-2Mo martensitic stainless steel (MSS), including austenitizing, cryogenic treatment, and tempering cycles. Cryogenic treatment at (−150 °C) for varying durations, followed by tempering at 200 °C for 2 h, and the impact of post-cryogenic tempering at 200 °C for different tempering duration on the microstructure and mechanical properties were evaluated. Experimental results indicate that the sample quenched at 1040 °C for 2 h (CHT) contains lath martensite, retained austenite, δ-ferrite, and undissolved carbide precipitation. Compared to as-quenched samples, hardness decreased by 5.04%, 7.24%, and 7.32% after tempering for 2 h, 5 h, and 10 h, respectively. Extending cryogenic durations to 2 h, 12 h, and 20 h promoted nucleation of a mixture of M3C and M23C6 small globular carbides (SGCs) and grain refinement but resulted in hardness reductions of 5.04%, 5.32%, and 8.36%, respectively. The reduction in hardness is primarily attributed to a decrease in solid solution strengthening and promoted carbide coarsening.

Schlagwörter

Stichwörter der Autor:innen

cryogenic treatmentmartensitic stainless steelmechanical propertiesmicrostructureretained austenite

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Road, Taipei 10617, Taiwan.

ORCID-Profile: Muhammad R R Fatih, Hou-Jen Chen

Zitieren

APA

Fatih, M. R. R., Chen, H. J., & Lin, H. C. (2025). The Effect of Cryogenic Treatment and Tempering Duration on the Microstructure and Mechanical Properties of Martensitic Stainless Steel 13Cr-2Ni-2Mo. Materials, 18(8), 1784. https://doi.org/10.3390/ma18081784

Vancouver

Fatih MRR, Chen HJ, Lin HC. The Effect of Cryogenic Treatment and Tempering Duration on the Microstructure and Mechanical Properties of Martensitic Stainless Steel 13Cr-2Ni-2Mo. Materials. 2025;18(8):1784. doi:10.3390/ma18081784

BibTeX
@article{Fatih2025,
  author = {Fatih, Muhammad R R and Chen, Hou-Jen and Lin, Hsin-Chih},
  title = {The Effect of Cryogenic Treatment and Tempering Duration on the Microstructure and Mechanical Properties of Martensitic Stainless Steel 13Cr-2Ni-2Mo},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {8},
  pages = {1784},
  doi = {10.3390/ma18081784}
}
Kostenlos starten →