EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cost-Effective Inorganic Multilayer Film for High-Performance Daytime Radiative Cooling

Huan Liu, Yingxin Yang, Atsha Ambar, Zhiqiang Fan, Ying Sun, Cong Wang

Materials · 10.04.2025 · 18 (8) · 1729

DOI: 10.3390/ma18081729 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.04.2025. Verfasst von Huan Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy and Power Engineering, Beihang University, Beijing 100191, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Chinese-German Mobility Programme Project, The Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inorganic multilayer films for radiative cooling have garnered significant attention due to their exceptional resistance to photothermal degradation. However, the design and fabrication of structurally simple and cost-effective inorganic multilayer films remain challenging due to limitations in material properties and the preparation process. This study develops a structurally simple inorganic multilayer film (Si3N4/SiO2/Al2O3/Si3N4/Al) for daytime radiative cooling. Instead of the conventional periodic alternation of high and low refractive indices (H-L…H-L), this work proposes a H-L-L-H symmetric multilayer film structure to achieve improved radiative cooling performance. The fabricated multilayer film demonstrates superior radiative cooling properties and lower thickness than that in the current studies using Al as the reflective layer, achieving a solar reflectance of 89.57%, an atmospheric window (8–13 μm) emissivity of 83.41%, and a net cooling power of 63.38 W·m−2. Under direct sunlight, the multilayer film demonstrated a maximum temperature reduction of approximately 3 °C compared to the reference sample. By employing a thermal treatment process for the Si3N4 layer, the poor adhesion between the Al layer and the Si3N4 layer is successfully addressed without compromising optical performance. The underlying physical mechanisms are also elucidated. This work provides an effective strategy for developing daytime radiative cooling inorganic multilayer films suitable for large-scale industrial production.

Schlagwörter

Stichwörter der Autor:innen

atmospheric windowcost-effectiveinorganic multilayer filmsinterface adhesionradiative cooling

Autor:innen und Institutionen

  • School of Energy and Power Engineering, Beihang University, Beijing 100191, China.
  • School of Physics, Beihang University, Beijing 100191, China.
  • School of Integrated Circuit Science and Engineering, Beihang University, Beijing 100191, China.
  • National Key Laboratory of Spintronics, Hangzhou International Innovation Institute, Beihang University, Hangzhou 311115, China.

Förderung

  • National Natural Science Foundation of China
  • Chinese-German Mobility Programme Project
  • The Fundamental Research Funds for the Central Universities
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Liu, H., Yang, Y., Ambar, A., Fan, Z., Sun, Y., & Wang, C. (2025). Cost-Effective Inorganic Multilayer Film for High-Performance Daytime Radiative Cooling. Materials, 18(8), 1729. https://doi.org/10.3390/ma18081729

Vancouver

Liu H, Yang Y, Ambar A, Fan Z, Sun Y, Wang C. Cost-Effective Inorganic Multilayer Film for High-Performance Daytime Radiative Cooling. Materials. 2025;18(8):1729. doi:10.3390/ma18081729

BibTeX
@article{Liu2025,
  author = {Liu, Huan and Yang, Yingxin and Ambar, Atsha and Fan, Zhiqiang and Sun, Ying and Wang, Cong},
  title = {Cost-Effective Inorganic Multilayer Film for High-Performance Daytime Radiative Cooling},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {8},
  pages = {1729},
  doi = {10.3390/ma18081729}
}
Kostenlos starten →