EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improvement of Microstructure and Mechanical Properties of a Hot-Extruded Cu-Al2O3 Alloy After Thermomechanical Treatment

Xu Wang, Xiaoqian Pan, Pengpeng Liu, Zhu Xiao, Tao Zhou, Chunlei Gan, Juan Wang

Materials · 02.04.2025 · 18 (7) · 1606

DOI: 10.3390/ma18071606 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.04.2025. Verfasst von Xu Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key-Area Research and Development Program of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presented an investigation into the microstructure evolution of a hot-extruded Cu-0.23Al2O3 alloy during thermomechanical treatment. The results demonstrated that cold rolling deformation introduced high-density dislocations into the matrix, resulting in a significant enhancement in the strength of the Cu-0.23Al2O3 alloy. Subsequent annealing at 500 for 1 h led to a reduction in dislocation density in the sample. Consequently, the strength of the sample decreased very slightly, while the elongation increased from 14% to 39%. There was little growth of the nano-scale Al2O3 particles due to their excellent thermal stability, with the average size remaining approximately 10 nm after annealing. The comprehensive properties of the Cu-0.23Al2O3 alloy were improved synchronously by thermomechanical treatment, with a tensile strength of 301 MPa and an electrical conductivity of 98.5%IACS. The calculation results of the strengthening mechanism indicated that refinement strengthening, work hardening and Orowan strengthening mainly contributed to the high strength of the Cu-0.23Al2O3 alloy.

Schlagwörter

Stichwörter der Autor:innen

Cu-Al2O3 alloyOrowan strengtheningthermomechanical treatment

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Central South University, Changsha 410083, China.
  • NIO, Shanghai 201800, China.
  • Key Laboratory of Non-Ferrous Metal Materials Science and Engineering, Ministry of Education, Changsha 410083, China.
  • Institute of New Materials, Guangdong Academy of Sciences, Guangzhou 510650, China.

Förderung

  • Key-Area Research and Development Program of Guangdong Province

Zitieren

APA

Wang, X., Pan, X., Liu, P., Xiao, Z., Zhou, T., Gan, C., & Wang, J. (2025). Improvement of Microstructure and Mechanical Properties of a Hot-Extruded Cu-Al2O3 Alloy After Thermomechanical Treatment. Materials, 18(7), 1606. https://doi.org/10.3390/ma18071606

Vancouver

Wang X, Pan X, Liu P, Xiao Z, Zhou T, Gan C, et al. Improvement of Microstructure and Mechanical Properties of a Hot-Extruded Cu-Al2O3 Alloy After Thermomechanical Treatment. Materials. 2025;18(7):1606. doi:10.3390/ma18071606

BibTeX
@article{Wang2025,
  author = {Wang, Xu and Pan, Xiaoqian and Liu, Pengpeng and Xiao, Zhu and Zhou, Tao and Gan, Chunlei and Wang, Juan},
  title = {Improvement of Microstructure and Mechanical Properties of a Hot-Extruded Cu-Al2O3 Alloy After Thermomechanical Treatment},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {7},
  pages = {1606},
  doi = {10.3390/ma18071606}
}
Kostenlos starten →