Advances in Enhancing the Wear Performance of Ti-6Al-4V Biomedical Alloy Through Nb2O5 Coating
Materials · 01.04.2025 · 18 (7) · 1593
DOI: 10.3390/ma18071593 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 01.04.2025. Verfasst von Murilo Oliveira Alves Ferreira und 7 weiteren Autor:innen. Beteiligte Einrichtung: Materials Engineering Department, São Carlos School of Engineering, University of São Paulo (USP), São Carlos 13563120, SP, Brazil. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Council for Scientific and Technological Development (CNPq-Brazil), São Paulo Research Foundation (FAPESP), Foundation for Research Support of the State of Minas Gerais (FAPEMIG-Brazil).
Abstract (Originalsprache)
The Ti-6Al-4V alloy is widely used in orthopedic and dental implants due to its excellent mechanical, corrosion, and biological properties. However, it exhibits several limitations that can compromise its performance in clinical applications. Notably, the alloy suffers from a high coefficient of friction, which can lead to increased wear and reduced longevity of implants under relative movement conditions. Additionally, Ti-6Al-4V shows susceptibility to localized corrosion in physiological environments, particularly in the presence of bodily fluids that may result in the formation of pitting. These challenges underscore the need for surface modifications that can enhance the alloy’s tribological performance, thereby improving its overall efficacy and durability as a biomaterial in medical settings. In this context, the manuscript presents applied and innovative research that assesses the impact of implementing nanostructured Nb2O5 coatings through the reactive sputtering technique on the wear performance of Ti-6Al-4V alloy under both air and artificial saliva (AS) solution conditions using a Pin-on-Disk apparatus. The nanostructured Nb2O5 coating demonstrated the ability to reduce the wear rate and volume by up to 88% without inducing any modifications to the Ra and Rt of Ti-6Al-4V, a feature that is desirable for applications in implantable devices. The reduction in wear can be attributed to the shift from adhesive wear mechanisms on uncoated surfaces to abrasive mechanisms on coated surfaces. This research highlights the strategic advantage of utilizing Brazil’s abundant niobium resources to advance biomaterial technology and facilitate applications that benefit public health.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Materials Engineering Department, São Carlos School of Engineering, University of São Paulo (USP), São Carlos 13563120, SP, Brazil.
- Institute of Technological and Exact Sciences, Federal University of Triângulo Mineiro (UFTM), Uberaba 38064200, MG, Brazil.
- Institute of Exact Sciences, Naturals and Education, Federal University of Triângulo Mineiro (UFTM), Avenida Doutor Randolfo Borges Júnior, Univerdecidade, Uberaba 38064200, MG, Brazil.
- Department of Dental Materials and Prosthesis, School of Dentistry of Ribeirão Preto, University of São Paulo (USP), Ribeirão Preto 14040904, SP, Brazil.
- Mechanical Engineering Department, São Carlos School of Engineering, University of São Paulo (USP), São Carlos 13566590, SP, Brazil.
ORCID-Profile: Murilo Oliveira Alves Ferreira, Witor Wolf, Rogério Valentim Gelamo, Rodrigo Galo, Carlos Alberto Fortulan, Jéferson Aparecido Moreto
Förderung
- National Council for Scientific and Technological Development (CNPq-Brazil)
- São Paulo Research Foundation (FAPESP)
- Foundation for Research Support of the State of Minas Gerais (FAPEMIG-Brazil)
- Companhia Brasileira de Metalúrgia e Mineração (CBMM)
Zitieren
APA
Ferreira, M. O. A., Wolf, W., Gelamo, R. V., Slade, N. B. L., Galo, R., Jasinevicius, R. G., Fortulan, C. A., & Moreto, J. A. (2025). Advances in Enhancing the Wear Performance of Ti-6Al-4V Biomedical Alloy Through Nb2O5 Coating. Materials, 18(7), 1593. https://doi.org/10.3390/ma18071593
Vancouver
Ferreira MOA, Wolf W, Gelamo RV, Slade NBL, Galo R, Jasinevicius RG, et al. Advances in Enhancing the Wear Performance of Ti-6Al-4V Biomedical Alloy Through Nb2O5 Coating. Materials. 2025;18(7):1593. doi:10.3390/ma18071593
BibTeX
@article{Ferreira2025,
author = {Ferreira, Murilo Oliveira Alves and Wolf, Witor and Gelamo, Rogério Valentim and Slade, Natália Bueno Leite and Galo, Rodrigo and Jasinevicius, Renato Goulart and Fortulan, Carlos Alberto and Moreto, Jéferson Aparecido},
title = {Advances in Enhancing the Wear Performance of Ti-6Al-4V Biomedical Alloy Through Nb2O5 Coating},
journal = {Materials},
year = {2025},
volume = {18},
number = {7},
pages = {1593},
doi = {10.3390/ma18071593}
}
EUVIMED