Preparation of Copper Oxide Film at Low Temperature in Basic Conditions on a Copper Substrate
Materials · 26.03.2025 · 18 (7) · 1487
DOI: 10.3390/ma18071487 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 26.03.2025. Verfasst von Francesca Irene Barbaccia und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Technological Innovation Engineering, International Telematic University Uninettuno, Corso Vittorio Emanuele II 39, 00186 Rome, Italy. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Copper is widely used in both its metallic form and as oxide across numerous scientific and industrial domains. The primary copper oxides, cuprite (Cu2O) and tenorite (CuO), naturally form on the copper surface and play a crucial role in advanced technologies, such as solar cells, lithium batteries, and sensors. Tenorite is appreciated for its optical properties, stability, low toxicity, and reactivity. While copper oxide thin films are traditionally synthesized through thermal treatments and oxidation in alkaline environments, these conventional high-temperature methods not only require significant energy consumption but can also compromise the metal–film interface. This study aims to develop a sustainable alternative approach for forming a homogeneous CuO layer on a copper substrate through environmentally friendly treatments based on low temperature, cost-effective, and time-saving procedures. Three different eco-conscious treatments were investigated: (i) immersion in NaOH basic solution, (ii) exposure to NaOH basic solution vapours, and (iii) a combined treatment involving both immersion and vapour exposure. This green synthesis approach significantly reduces energy consumption compared to traditional thermal methods while maintaining product quality. The surface oxide layer was investigated through an optical microscope (OM), scanning electron microscopy (SEM), spectrocolorimetric analysis, peel-off test, µ-Raman and X-ray photoelectron spectroscopy (XPS) analysis to investigate the surface oxidation state.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Technological Innovation Engineering, International Telematic University Uninettuno, Corso Vittorio Emanuele II 39, 00186 Rome, Italy.
- Youth in Conservation of Cultural Heritage (YOCOCU APS), Via T. Tasso 108, 00185 Rome, Italy.
- Institute of Nanostructured Materials, National Research Council (ISMN-CNR), Strada Provinciale 35d, 9, 00010 Rome, Italy.
- Institute for Polymers, Composites, and Biomaterials, National Research Council (IPCB-CNR), Piazzale Enrico Fermi 1, 80055 Portici, Italy.
ORCID-Profile: Francesca Irene Barbaccia, Tilde de Caro, Alessio Mezzi, Michele Giordano, Andrea Macchia
Zitieren
APA
Barbaccia, F. I., de Caro, T., Federici, F., Mezzi, A., Sansone, L., Giordano, M., & Macchia, A. (2025). Preparation of Copper Oxide Film at Low Temperature in Basic Conditions on a Copper Substrate. Materials, 18(7), 1487. https://doi.org/10.3390/ma18071487
Vancouver
Barbaccia FI, de Caro T, Federici F, Mezzi A, Sansone L, Giordano M, et al. Preparation of Copper Oxide Film at Low Temperature in Basic Conditions on a Copper Substrate. Materials. 2025;18(7):1487. doi:10.3390/ma18071487
BibTeX
@article{Barbaccia2025,
author = {Barbaccia, Francesca Irene and de Caro, Tilde and Federici, Fulvio and Mezzi, Alessio and Sansone, Lucia and Giordano, Michele and Macchia, Andrea},
title = {Preparation of Copper Oxide Film at Low Temperature in Basic Conditions on a Copper Substrate},
journal = {Materials},
year = {2025},
volume = {18},
number = {7},
pages = {1487},
doi = {10.3390/ma18071487}
}
EUVIMED