EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Ultrasonic Vibration-Assisted Grinding in Multi-Process Profile Grinding of K4002 Nickel-Based Superalloy Blade Tenons

Yang Cao, Yun He, Fei Liu, Benkai Li, Zheng Li iD, Xiaobo Guo, Zhangquan Lv

Materials · 24.03.2025 · 18 (7) · 1437

DOI: 10.3390/ma18071437 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.03.2025. Verfasst von Yang Cao und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Aviation Manufacturing Engineering, Anyang Institute of Technology, Anyang 455000, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Henan Province's Key Research and Promotion (Scientific and Technological) Project, Henan Province’s Key Research and Promotion (Scientific and Technological) Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fir-tree blade tenon is an important connection part of the turbine blade; its machining quality directly affects the life and power of the aeroengine. At present, the machining of the blade tenon requires multiple profile grinding processes. This study highlights the whole profile of the grinding processes of K4002 nickel-based superalloy blade tenons in ultrasonic vibration-assisted grinding (UVG). A probability superposition method was utilized to calculate the undeformed chip thickness and contact rate considering the random distribution of the abrasive grains and the overlap of the grinding trajectories. Subsequently, the grinding force, grinding temperature and surface integrity of the blade tenons in conventional grinding (CG) and UVG were investigated. The results indicate that the ultrasonic vibration causes intermittent cutting behavior which can reduce the contact rate to 0.6 at most. The grinding force, grinding temperature and surface integrity are deeply affected by the fir-tree shape of the blade tenon. The maximum grinding force occurs at the start of the full contact stage; surface burnout easily occurs in the middle top area of the blade tenon. Compared to CG, the use of UVG leads to an average reduction in the grinding force and temperature by 20% and 23%, respectively, improving the surface burnout of the K4002 superalloy.

Schlagwörter

Stichwörter der Autor:innen

blade tenon grindinggrinding forcegrinding temperatureintermittent cutting behaviorsurface integrity

Autor:innen und Institutionen

  • School of Mechanical and Aviation Manufacturing Engineering, Anyang Institute of Technology, Anyang 455000, China.
  • School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao 266520, China.
  • School of Mechanical Engineering, Zhengzhou University of Aeronautics, Zhengzhou 450046, China.

ORCID-Profile: Zheng Li

Förderung

  • National Natural Science Foundation of China
  • Henan Province's Key Research and Promotion (Scientific and Technological) Project
  • Henan Province’s Key Research and Promotion (Scientific and Technological) Project

Zitieren

APA

Cao, Y., He, Y., Liu, F., Li, B., Li, Z., Guo, X., & Lv, Z. (2025). Evaluation of Ultrasonic Vibration-Assisted Grinding in Multi-Process Profile Grinding of K4002 Nickel-Based Superalloy Blade Tenons. Materials, 18(7), 1437. https://doi.org/10.3390/ma18071437

Vancouver

Cao Y, He Y, Liu F, Li B, Li Z, Guo X, et al. Evaluation of Ultrasonic Vibration-Assisted Grinding in Multi-Process Profile Grinding of K4002 Nickel-Based Superalloy Blade Tenons. Materials. 2025;18(7):1437. doi:10.3390/ma18071437

BibTeX
@article{Cao2025,
  author = {Cao, Yang and He, Yun and Liu, Fei and Li, Benkai and Li, Zheng and Guo, Xiaobo and Lv, Zhangquan},
  title = {Evaluation of Ultrasonic Vibration-Assisted Grinding in Multi-Process Profile Grinding of K4002 Nickel-Based Superalloy Blade Tenons},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {7},
  pages = {1437},
  doi = {10.3390/ma18071437}
}
Kostenlos starten →