High-Temperature Wetting Behavior and Adhesion Mechanism of Cryolite-Based Molten Salt on SiC Refractory Substrate
Materials · 24.03.2025 · 18 (7) · 1428
DOI: 10.3390/ma18071428 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 24.03.2025. Verfasst von Yuxi Feng und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou 730050, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Educational Unveiling Leadership Project of Gansu Province, National Natural Science Foundation of China, Distinguished Youth Foundation of Gansu Province.
Abstract (Originalsprache)
The problem of the adhesion of aluminum slag to the inner wall of a vacuum ladle is essential but has not been addressed. Using a high-temperature wettability experimental setup, this paper investigates the mechanism of interfacial wettability, adhesion, and penetration between Na3AlF6-Al2O3-CaF2 cryolite-based molten salt and SiC refractory substrate. The composition of the slag was determined based on the slag obtained in the transfer ladle during the aluminum electrolysis process. We mainly study the effects of different Al2O3 contents in cryolite-based molten salt and temperatures on the contact angle and surface tension. The results indicate that as the Al2O3 content in the slag increases, the contact angle decreases, enhancing the slag’s wettability on the SiC substrate. Additionally, a higher Al2O3 content leads to higher slag melting temperatures and surface tension, which improves the slag mobility and enhances the mass transfer and diffusion capabilities of molecules or ions within the slag. The work of adhesion, calculated using the Mills model, also increases with the increasing Al2O3 content. The increased Al2O3 concentration activates the activity of Na3AlF6 in the slag, facilitating the dissolution reactions and improving the wettability between the slag and SiC. Moreover, the wetting behavior of the Na3AlF6-Al2O3-CaF2 slag is primarily influenced by the initial Al2O3 content and its compositional changes. The results show that the slag penetration resistance and mechanical erosion resistance of the ladle lining can be improved by using an SiC-based refractory with an optimized Al2O3 content. This will have important guiding significance for the development, design, and application of inner wall materials for aluminum electrolysis industrial vacuum ladles.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou 730050, China.
- Engineering Research Center of New Nonferrous Metallurgy Equipment, Ministry of Education, Lanzhou University of Technology, Lanzhou 730050, China.
ORCID-Profile: Wandong Cheng
Förderung
- Educational Unveiling Leadership Project of Gansu Province
- National Natural Science Foundation of China
- Distinguished Youth Foundation of Gansu Province
- Excellent Doctoral Foundation of Gansu Province
- China Postdoctoral Science Foundation
- Longyuan Youth Talents Program Project
- Gansu Postdoctoral Science Foundation
- 14th Five-Year Plan Project for Education and Science of Gansu Province
Zitieren
APA
Feng, Y., Cheng, W., Rui, Z., Sun, H., Lyu, X., & Dong, Y. (2025). High-Temperature Wetting Behavior and Adhesion Mechanism of Cryolite-Based Molten Salt on SiC Refractory Substrate. Materials, 18(7), 1428. https://doi.org/10.3390/ma18071428
Vancouver
Feng Y, Cheng W, Rui Z, Sun H, Lyu X, Dong Y. High-Temperature Wetting Behavior and Adhesion Mechanism of Cryolite-Based Molten Salt on SiC Refractory Substrate. Materials. 2025;18(7):1428. doi:10.3390/ma18071428
BibTeX
@article{Feng2025,
author = {Feng, Yuxi and Cheng, Wandong and Rui, Zhiyuan and Sun, Haobo and Lyu, Xin and Dong, Yun},
title = {High-Temperature Wetting Behavior and Adhesion Mechanism of Cryolite-Based Molten Salt on SiC Refractory Substrate},
journal = {Materials},
year = {2025},
volume = {18},
number = {7},
pages = {1428},
doi = {10.3390/ma18071428}
}
EUVIMED