EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of TiC, TiH2, Al, and Carbon on Production of Ti3AlC2 by Self-Sustaining Combustion Synthesis

Chun-Liang Yeh iD, Yu-Ting Chen

Materials · 14.03.2025 · 18 (6) · 1293

DOI: 10.3390/ma18061293 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.03.2025. Verfasst von Chun-Liang Yeh und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace and Systems Engineering, Feng Chia University, Taichung 40724, Taiwan. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council of Taiwan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The production of Ti3AlC2 was investigated by self-propagating high-temperature synthesis (SHS) using the sample compacts composed of elemental powders with or without TiC and TiH2 additions. The influence of Al, carbon, TiC, and TiH2 was explored on the combustion sustainability, combustion velocity and temperature, and phase composition and microstructure of the product. The experimental results indicated that the elemental sample with an Al-excess composition increased the combustion velocity and improved the formation of Ti3AlC2, but the sample with a carbon-deficient composition produced the opposite effect. Although both TiC and TiH2 additions decreased combustion exothermicity, an appropriate amount of TiC enhanced the yield of Ti3AlC2. However, the incomplete decomposition made TiH2 unsuitable as a source of Ti and resulted in a low yield of Ti3AlC2. In this study, the final product containing the highest content of Ti3AlC2 was synthesized from the Al-excess and TiC-added sample of 2.5Ti + 1.2Al + 1.5C + 0.5TiC, and the product was composed of 89.3 wt.% Ti3AlC2, 5.9 wt.% Ti2AlC, and 4.8 wt.% TiC. A reaction mechanism was proposed for the formation of Ti3AlC2 by SHS, which involved three exothermic reaction steps sequentially producing TiC, Ti2AlC, and Ti3AlC2. The as-synthesized Ti3AlC2 grains were in the shape of thin platelets with a thickness of about 1.0 μm, and a layered structure formed by closely stacked platelets was clearly observed.

Schlagwörter

Stichwörter der Autor:innen

Ti3AlC2TiCX-ray diffractioncombustion synthesisexcess Alweight fraction

Autor:innen und Institutionen

  • Department of Aerospace and Systems Engineering, Feng Chia University, Taichung 40724, Taiwan.

ORCID-Profile: Chun-Liang Yeh

Förderung

  • National Science and Technology Council of Taiwan

Zitieren

APA

Yeh, C. L., & Chen, Y. T. (2025). Effects of TiC, TiH2, Al, and Carbon on Production of Ti3AlC2 by Self-Sustaining Combustion Synthesis. Materials, 18(6), 1293. https://doi.org/10.3390/ma18061293

Vancouver

Yeh CL, Chen YT. Effects of TiC, TiH2, Al, and Carbon on Production of Ti3AlC2 by Self-Sustaining Combustion Synthesis. Materials. 2025;18(6):1293. doi:10.3390/ma18061293

BibTeX
@article{Yeh2025,
  author = {Yeh, Chun-Liang and Chen, Yu-Ting},
  title = {Effects of TiC, TiH2, Al, and Carbon on Production of Ti3AlC2 by Self-Sustaining Combustion Synthesis},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {6},
  pages = {1293},
  doi = {10.3390/ma18061293}
}
Kostenlos starten →