Evaluation of Thermal Stability and Thermal Transitions of Hydroxyl-Terminated Polysiloxane/Montmorillonite Nanocomposites
Materials · 10.03.2025 · 18 (6) · 1226
DOI: 10.3390/ma18061226 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.03.2025. Verfasst von Sozon P Vasilakos und 1 weiteren Autor:innen. Beteiligte Einrichtung: Polymer Technology Lab., School of Chemical Engineering, National Technical University of Athens, 15780 Athens, Greece. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Condensation-type polysiloxane composites with montmorillonite (MMT) of different organic modifications were prepared in this study. X-ray diffraction (XRD) characterization revealed that the higher degree of organic modification in Cloisite 20A, compared to that in Cloisite 30B, resulted in a larger interlayer spacing between the clay platelets. This facilitates the insertion of elastomer chains between the layers, enabling easier exfoliation and dispersion in the elastomeric matrix. Differential scanning calorimetry (DSC) showed that the reinforcing agents used reduced the cold crystallization temperature of the condensation-type polysiloxane while leaving the glass transition and melting temperatures nearly unaffected. Additionally, the nanocomposites exhibited slightly lower crystallization and melting enthalpies compared to pure silicone. Thermogravimetric analysis (TGA) showed that incorporating the two organically modified clays (Cloisite 20A and Cloisite 30B) into the condensation-type polysiloxane significantly improved the thermal stability of the resulting nanocomposites. This improvement was reflected in the significant increase in the onset and maximum degradation rate temperatures across all examined reinforcement ratios. It was observed that a higher degree of organic modification in MMT (Cloisite 20A) resulted in a more efficient dispersion in the PDMS matrix and enhanced the thermal stability of the composites. These PDMS nanocomposites could be suitable as protective coatings for devices exposed to elevated temperatures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Polymer Technology Lab., School of Chemical Engineering, National Technical University of Athens, 15780 Athens, Greece.
Zitieren
APA
Vasilakos, S. P., & Tarantili, P. A. (2025). Evaluation of Thermal Stability and Thermal Transitions of Hydroxyl-Terminated Polysiloxane/Montmorillonite Nanocomposites. Materials, 18(6), 1226. https://doi.org/10.3390/ma18061226
Vancouver
Vasilakos SP, Tarantili PA. Evaluation of Thermal Stability and Thermal Transitions of Hydroxyl-Terminated Polysiloxane/Montmorillonite Nanocomposites. Materials. 2025;18(6):1226. doi:10.3390/ma18061226
BibTeX
@article{Vasilakos2025,
author = {Vasilakos, Sozon P and Tarantili, Petroula A},
title = {Evaluation of Thermal Stability and Thermal Transitions of Hydroxyl-Terminated Polysiloxane/Montmorillonite Nanocomposites},
journal = {Materials},
year = {2025},
volume = {18},
number = {6},
pages = {1226},
doi = {10.3390/ma18061226}
}
EUVIMED