EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Cu/SiC Surface Composite via Thermo-Mechanical Process (Friction Stir Processing) for Heat Sink Application

Harikishor Kumar, Abhishek Agarwal iD, Michel Kalenga Wa Kalenga, Rabindra Prasad, Parshant Kumar iD, L Aslesha Chilakamarri iD, Balram Yelamasetti iD

Materials · 06.03.2025 · 18 (5) · 1179

DOI: 10.3390/ma18051179 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.03.2025. Verfasst von Harikishor Kumar und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, MLR Institute of Technology, Hyderabad 500043, Telangana, India. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Johannesburg.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For the busting of heat, generated in electronic packages, relevant materials need to be developed. Metal matrix composites may be considered as an option to tailor the properties of a material (Cu) by incorporating an additional phase (SiC) for fulfilling the requirements of thermal management systems. The composite (Cu/SiC) was manufactured by friction stir processing. For good interfacial strength, the biggest challenge in the fabrication of Cu/SiC composite was to abolish the reaction between Cu and SiC. Being solid in nature, the process (friction stir processing) does not allow temperature to reach the interfacial interaction. Scanning electron microscopy, electron backscattered diffraction, and optical microscopy were used to characterise the composite for microstructural features (particle dispersion, phases present). To confirm the presence of reinforcement, EDS analysis was also performed on the composite. Results indicated the presence of Cu and SiC phases in the stir zone (SZ) with uniform and homogeneous separation of reinforcements. The composite displayed higher hardness, tensile strength, and wear resistance in comparison to unprocessed copper. However, ductility decreased due to high hardness in the composite.

Schlagwörter

Stichwörter der Autor:innen

SiCfriction stir processinghardnesstensile strengththermal conductivitywear

Autor:innen und Institutionen

  • Department of Mechanical Engineering, MLR Institute of Technology, Hyderabad 500043, Telangana, India.
  • Department of Mechanical Engineering, College of Science and Technology, Royal University of Bhutan, Phuentsholing 21101, Bhutan.
  • Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of Engineering and the Build Environment, University of Johannesburg, P.O. Box 17001, Doornfontein 2028, South Africa.
  • Department of Mechanical Engineering, Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur 482005, Madhya Pradesh, India.
  • School of Mechanical Engineering, Dr. Vishwanath Karad MIT World Peace University, Pune 411038, Maharashtra, India.
  • Department of Mechanical Engineering, Vignan's Institute of Engineering for Women, Visakhapatnam 530049, Andhra Pradesh, India.

ORCID-Profile: Abhishek Agarwal, Parshant Kumar, L Aslesha Chilakamarri, Balram Yelamasetti

Förderung

  • University of Johannesburg

Zitieren

APA

Kumar, H., Agarwal, A., Kalenga, M. K. W., Prasad, R., Kumar, P., Chilakamarri, L. A., & Yelamasetti, B. (2025). Fabrication of Cu/SiC Surface Composite via Thermo-Mechanical Process (Friction Stir Processing) for Heat Sink Application. Materials, 18(5), 1179. https://doi.org/10.3390/ma18051179

Vancouver

Kumar H, Agarwal A, Kalenga MKW, Prasad R, Kumar P, Chilakamarri LA, et al. Fabrication of Cu/SiC Surface Composite via Thermo-Mechanical Process (Friction Stir Processing) for Heat Sink Application. Materials. 2025;18(5):1179. doi:10.3390/ma18051179

BibTeX
@article{Kumar2025,
  author = {Kumar, Harikishor and Agarwal, Abhishek and Kalenga, Michel Kalenga Wa and Prasad, Rabindra and Kumar, Parshant and Chilakamarri, L Aslesha and Yelamasetti, Balram},
  title = {Fabrication of Cu/SiC Surface Composite via Thermo-Mechanical Process (Friction Stir Processing) for Heat Sink Application},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {5},
  pages = {1179},
  doi = {10.3390/ma18051179}
}
Kostenlos starten →