EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterization of Morphological, Thermal, and Mechanical Performances and UV Ageing Degradation of Post-Consumer Recycled Polypropylene for Automotive Industries

Matilde Arese iD, Beatrice Cavallo, Gabriele Ciaccio iD, Valentina Brunella iD

Materials · 28.02.2025 · 18 (5) · 1090

DOI: 10.3390/ma18051090 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.02.2025. Verfasst von Matilde Arese und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, University of Turin, 10125 Turin, Italy. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Considering the increasing use of plastics in vehicles, the need for sustainable management is becoming a matter of concern. The reintroduction of plastic originated from post-consumer waste in the vehicle manufacturing loop can also be a solution to meet the recent EU ELVs (end-of-life vehicles) legislation in terms of sustainability. This study focuses on post-consumer polypropylene (PP) compounds destined for automotive applications by assessing their morphological, thermal, and mechanical properties. Field Emission Scanning Electron Microscopy (FE-SEM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) techniques were used. Since the ageing of these materials, caused by the thermo-oxidative degradation process, may compromise their performances, a comprehensive study of their behavior, in comparison to the virgin compound counterpart, was necessary to evaluate the fossil replacement possibility. Furthermore, an additional investigation was conducted after subjecting the materials to UV ageing in order to simulate the degradation effect of solar radiation, with the aim of determining the suitability of the recycled materials in long-term applications. In summary, the results support the feasibility of using recycled post-consumer materials mixed with virgin grade in automotive production, highlighting the stability of thermal and mechanical properties, critical for efficient manufacturing. This research underlines the noteworthy progress in the circularity of automotive plastics, providing a sustainable solution for integrating plastic material waste into new vehicle production.

Schlagwörter

Stichwörter der Autor:innen

EPDMcarbon blackcopolymerdegradationpolyolefinrecyclingsolar ageingsustainabilitytalcwaste

Autor:innen und Institutionen

  • Department of Chemistry, University of Turin, 10125 Turin, Italy.
  • Fiat Research Center SCPA (CRF), Stellantis, 10135 Turin, Italy.

ORCID-Profile: Matilde Arese, Gabriele Ciaccio, Valentina Brunella

Zitieren

APA

Arese, M., Cavallo, B., Ciaccio, G., & Brunella, V. (2025). Characterization of Morphological, Thermal, and Mechanical Performances and UV Ageing Degradation of Post-Consumer Recycled Polypropylene for Automotive Industries. Materials, 18(5), 1090. https://doi.org/10.3390/ma18051090

Vancouver

Arese M, Cavallo B, Ciaccio G, Brunella V. Characterization of Morphological, Thermal, and Mechanical Performances and UV Ageing Degradation of Post-Consumer Recycled Polypropylene for Automotive Industries. Materials. 2025;18(5):1090. doi:10.3390/ma18051090

BibTeX
@article{Arese2025,
  author = {Arese, Matilde and Cavallo, Beatrice and Ciaccio, Gabriele and Brunella, Valentina},
  title = {Characterization of Morphological, Thermal, and Mechanical Performances and UV Ageing Degradation of Post-Consumer Recycled Polypropylene for Automotive Industries},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {5},
  pages = {1090},
  doi = {10.3390/ma18051090}
}
Kostenlos starten →