Micro-Alloying Effects on Microstructure and Weldability of High-Strength Low-Alloy Steel: A Review
Materials · 26.02.2025 · 18 (5) · 1036
DOI: 10.3390/ma18051036 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 26.02.2025. Verfasst von Jian Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Nonferrous Metal Materials Science and Engineering (Ministry of Education), School of Materials Science and Engineering, Central So…. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 104 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
High-strength low-alloy (HSLA) steels have garnered significant attention owing to their widespread applications across various industries, with weldability being a particularly critical aspect. However, the impact toughness of the coarse-grained heat-affected zone (CGHAZ) remains a notable challenge under high-heat-input welding conditions. Despite existing research acknowledging the beneficial effects of micro-alloying elements on steel properties, there are still numerous uncertainties and controversies regarding the specific influence of these elements on the microstructure and impact toughness of the CGHAZ under specific welding conditions. To address this issue, this study presents a comprehensive review of the impact of common micro-alloying elements on the microstructure and toughness of the CGHAZ during high-heat-input welding. The results indicate that elements such as cerium, magnesium, titanium, vanadium, nitrogen, and boron significantly improve the toughness of the CGHAZ by promoting intragranular nucleation of acicular ferrite and inhibiting the coarsening of austenite grains. In contrast, the addition of elements such as aluminum and niobium adversely affect the toughness of the CGHAZ. These findings offer crucial theoretical guidance and experimental evidence for further optimizing the welding performance of HSLA steels and enhancing the impact toughness of the CGHAZ.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Nonferrous Metal Materials Science and Engineering (Ministry of Education), School of Materials Science and Engineering, Central South University, Changsha 410083, China.
- Institute of Structural Steels, Central Iron and Steel Research Institute, Beijing 100081, China.
Zitieren
APA
Chen, J., Shi, Z., Luo, X., Chai, F., Pan, T., Feng, G., & Yang, C. (2025). Micro-Alloying Effects on Microstructure and Weldability of High-Strength Low-Alloy Steel: A Review. Materials, 18(5), 1036. https://doi.org/10.3390/ma18051036
Vancouver
Chen J, Shi Z, Luo X, Chai F, Pan T, Feng G, et al. Micro-Alloying Effects on Microstructure and Weldability of High-Strength Low-Alloy Steel: A Review. Materials. 2025;18(5):1036. doi:10.3390/ma18051036
BibTeX
@article{Chen2025,
author = {Chen, Jian and Shi, Zhongran and Luo, Xiaobing and Chai, Feng and Pan, Tao and Feng, Guanghong and Yang, Caifu},
title = {Micro-Alloying Effects on Microstructure and Weldability of High-Strength Low-Alloy Steel: A Review},
journal = {Materials},
year = {2025},
volume = {18},
number = {5},
pages = {1036},
doi = {10.3390/ma18051036}
}
EUVIMED