Manufacturing and Properties of Jute Fiber-Reinforced Polymer Composites—A Comprehensive Review
Materials · 25.02.2025 · 18 (5) · 1016
DOI: 10.3390/ma18051016 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 25.02.2025. Verfasst von Raiyan Mohammad Iqbal und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna 9203, Bangladesh. Die Arbeit wurde bisher 54-mal zitiert (Crossref) und nennt 177 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Jute fiber-reinforced composites have become a promising alternative to synthetic fiber composites because of their favorable environmental characteristics, cost efficiency, and good mechanical properties. The present review provides a comprehensive examination of the manufacturing processes and mechanical properties of polymer composites reinforced with jute fibers. This study investigates the influence of several fabrication methods, such as hand lay-up, compression molding, injection molding, pultrusion, etc., on the mechanical properties of the composites. It also provides SWOT analyses of various manufacturing processes of jute fiber-reinforced composites. Important aspects, including fiber orientation, fiber/matrix adhesion, and the effects of different surface treatments on improving mechanical characteristics, such as tensile strength, flexural strength, and impact resistance, are discussed. The difficulties associated with moisture absorption, degradation, and the lack of uniformity in jute fibers, as well as approaches to alleviate these problems, are presented. The goal of this study is to establish a basis for future investigation and advancement in enhancing the mechanical properties of jute fiber-reinforced composites.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna 9203, Bangladesh.
- School of Engineering and Centre for Future Materials, University of Southern Queensland, Toowoomba, QLD 4350, Australia.
ORCID-Profile: Raiyan Mohammad Iqbal, Md Arifuzzaman, Md Shariful Islam, Md Mainul Islam
Zitieren
APA
Iqbal, R. M., Ahammad, R., Arifuzzaman, M., Islam, M. S., & Islam, M. M. (2025). Manufacturing and Properties of Jute Fiber-Reinforced Polymer Composites—A Comprehensive Review. Materials, 18(5), 1016. https://doi.org/10.3390/ma18051016
Vancouver
Iqbal RM, Ahammad R, Arifuzzaman M, Islam MS, Islam MM. Manufacturing and Properties of Jute Fiber-Reinforced Polymer Composites—A Comprehensive Review. Materials. 2025;18(5):1016. doi:10.3390/ma18051016
BibTeX
@article{Iqbal2025,
author = {Iqbal, Raiyan Mohammad and Ahammad, Raju and Arifuzzaman, Md and Islam, Md Shariful and Islam, Md Mainul},
title = {Manufacturing and Properties of Jute Fiber-Reinforced Polymer Composites—A Comprehensive Review},
journal = {Materials},
year = {2025},
volume = {18},
number = {5},
pages = {1016},
doi = {10.3390/ma18051016}
}
EUVIMED