EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Cross-Section on Low-Temperature Fracture Toughness of Marine Engineering Steel Thick Plate

Kuan Zheng, Liqin Zhang iD, Chengyang Hu iD, Lei Hu, Kaiming Wu

Materials · 25.02.2025 · 18 (5) · 1015

DOI: 10.3390/ma18051015 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.02.2025. Verfasst von Kuan Zheng und 4 weiteren Autor:innen. Beteiligte Einrichtung: Collaborative Innovation Center for Advanced Steels, Wuhan University of Science and Technology, Wuhan 430081, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Hubei Province "JD" technology research project, Hubei Province “JD” technology research project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The cross-section effect leads to variations in the microstructure and thickness of marine engineering steel thick plates, which may result in delaminated tearing and a reduction in material plasticity and fracture toughness. The microstructural characterization of the matrix and the regions near the impact fracture at different depths by the thickness of the thick plate, as well as the crack propagation mechanism, was investigated. The low-temperature fracture toughness at the surface, quarter-thickness, and center at −40 °C were found to be 204 J, 215 J, and 98 J, respectively. Near the impact fracture, the grains of the test steel exhibit significant deformation. The grains at the surface experience fragmentation, leading to grain refinement and the formation of serrated cracks. At the quarter-thickness, cracks display large-angle deflection, and the deflection at the center is notably reduced, accompanied by an increase in the number of voids. In this study, the influence of the cross-section effect on the fracture toughness of marine engineering steel thick plates is thoroughly investigated. The experimental results provide theoretical guidance for the design and production of thick plates with optimal strength and toughness. This study primarily examines the influence of the cross-section effect on the microstructure and low-temperature fracture toughness of the investigated steel. Furthermore, it not only examines the microstructure of the base metal but also employs electron backscatter diffraction (EBSD) technology to characterize and analyze the microstructure near the crack, thereby exploring the influence of the cross-section effect on the fracture mechanism of the investigated steel.

Schlagwörter

Stichwörter der Autor:innen

crack deflectioncross-section effectlow-temperature fracture toughnessmicrostructural characterization

Autor:innen und Institutionen

  • Collaborative Innovation Center for Advanced Steels, Wuhan University of Science and Technology, Wuhan 430081, China.
  • Department of Applied Physics, Wuhan University of Science and Technology, Wuhan 430081, China.

ORCID-Profile: Liqin Zhang, Chengyang Hu

Förderung

  • National Natural Science Foundation of China
  • Hubei Province "JD" technology research project
  • Hubei Province “JD” technology research project

Zitieren

APA

Zheng, K., Zhang, L., Hu, C., Hu, L., & Wu, K. (2025). Effect of Cross-Section on Low-Temperature Fracture Toughness of Marine Engineering Steel Thick Plate. Materials, 18(5), 1015. https://doi.org/10.3390/ma18051015

Vancouver

Zheng K, Zhang L, Hu C, Hu L, Wu K. Effect of Cross-Section on Low-Temperature Fracture Toughness of Marine Engineering Steel Thick Plate. Materials. 2025;18(5):1015. doi:10.3390/ma18051015

BibTeX
@article{Zheng2025,
  author = {Zheng, Kuan and Zhang, Liqin and Hu, Chengyang and Hu, Lei and Wu, Kaiming},
  title = {Effect of Cross-Section on Low-Temperature Fracture Toughness of Marine Engineering Steel Thick Plate},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {5},
  pages = {1015},
  doi = {10.3390/ma18051015}
}
Kostenlos starten →