EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Deformation Control of Adjustable-Ring-Mode (ARM) Laser Welding for Aluminum Alloys

Jinglong Tang, Minglie Hu iD, Jie Su, Qijun Guo, Xiaohua Wang, Zhen Luo

Materials · 16.02.2025 · 18 (4) · 860

DOI: 10.3390/ma18040860 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.02.2025. Verfasst von Jinglong Tang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Ultrafast Laser Laboratory, Key Laboratory of Opto-Electronic Information Technical Science of Ministry of Education, School of Precision Instruments…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the domain of new energy vehicles, the control of welding deformation in aluminum alloy battery systems poses substantial challenges. The existing methodologies for diminishing welding deformation, such as laser segmented skip welding, alteration of welding path sequences, numerical simulation prediction, and post-weld heat treatment, still possess room for further optimization when applied to intricate welding structures. In this research, a novel adjustable-ring-mode laser in conjunction with the oscillation welding technique was employed to explore the impacts of fiber core diameter, laser light field brightness distribution, and process parameters on weld formation. The regulation of welding deformation was achieved through optimizing the welding process and adjusting the welding path. The results indicate that when the fiber core diameter is 50/150 µm and the light field brightness distribution is H, the weld size exhibits the highest stability. Under the conditions of process parameters p = 5300 W, v = 5.4 m/min, A = 1.6 mm, f = 120 Hz, and θ = 40°, and with the spot position located at the bottom of the side of the upper substrate, the optimal weld formation is obtained. After optimizing the welding path, the maximum Z-direction deformation of the weld is 1.403 mm, representing a reduction of 1.702 mm compared to the previous value. This work is capable of providing novel theoretical guidance and technical insights for the control of welding deformation in thin aluminum alloy plates.

Schlagwörter

Stichwörter der Autor:innen

adjustable-ring-mode laser weldingaluminum alloybeam qualitywelding deformation

Autor:innen und Institutionen

  • Ultrafast Laser Laboratory, Key Laboratory of Opto-Electronic Information Technical Science of Ministry of Education, School of Precision Instruments and Opto-Electronics Engineering, Tianjin University, Tianjin 300072,…
  • School of Materials Science and Engineering, Tianjin University, Tianjin 300350, China.

ORCID-Profile: Minglie Hu

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Tang, J., Hu, M., Su, J., Guo, Q., Wang, X., & Luo, Z. (2025). Deformation Control of Adjustable-Ring-Mode (ARM) Laser Welding for Aluminum Alloys. Materials, 18(4), 860. https://doi.org/10.3390/ma18040860

Vancouver

Tang J, Hu M, Su J, Guo Q, Wang X, Luo Z. Deformation Control of Adjustable-Ring-Mode (ARM) Laser Welding for Aluminum Alloys. Materials. 2025;18(4):860. doi:10.3390/ma18040860

BibTeX
@article{Tang2025,
  author = {Tang, Jinglong and Hu, Minglie and Su, Jie and Guo, Qijun and Wang, Xiaohua and Luo, Zhen},
  title = {Deformation Control of Adjustable-Ring-Mode (ARM) Laser Welding for Aluminum Alloys},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {4},
  pages = {860},
  doi = {10.3390/ma18040860}
}
Kostenlos starten →