EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Studies of the Thermophysical Properties of Selected Hot-Working Tool Steels in a Wide Temperature Range

Piotr Koniorczyk iD, Mateusz Zieliński iD, Janusz Zmywaczyk iD

Materials · 15.02.2025 · 18 (4) · 852

DOI: 10.3390/ma18040852 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 15.02.2025. Verfasst von Piotr Koniorczyk und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechatronics, Armament and Aerospace, Military University of Technology, ul. gen. S. Kaliskiego 2, 00-908 Warsaw, Poland. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Military University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, measurements of the thermal diffusivity and thermal expansion of hot-working tool steel WLV (1.2365) were carried out in the temperature range from (−)50 °C to 500 °C. The results of these measurements were compared with those published earlier by the authors for other selected hot-working tool steels, i.e., 38HMJ (1.8509) and WCL (1.2342), in the temperature range from (−)50 °C to 500 °C and from room temperature (RT) to 1100 °C. This paper describes the procedures used to relate the thermal characteristics of the thermal diffusivity and thermal expansion obtained at low temperatures to those obtained at high temperatures. Thermal diffusivity and thermal expansion of WLV, 38HMJ and WCL steels in the temperature range from (−)50 °C to 1100 °C were used as input data for numerical simulations of heat transfer in devices made of these steels and operating in a wide temperature range. Thermophysical properties were tested using specialized NETZSCH test stands. Thermal diffusivity was studied using a LFA 467 light flash apparatus in the temperature range from (−)50 °C to 500 °C and a LFA 427 laser flash apparatus in the temperature range from RT to 1100 °C. Thermal expansion was tested using a DIL 402 Expedis dilatometer in the range from (−)50 °C to 500 °C and a DIL 402 C dilatometer in the temperature range from RT to 1100 °C. Finally, the results of tests on thermophysical properties of selected steels in the temperature range from (−)50 °C to 1100 °C were summarized.

Schlagwörter

Stichwörter der Autor:innen

38HMJ (1.8509) steelWCL (1.2342) steelWLV (1.2365) steelthermal diffusivitythermal expansion

Autor:innen und Institutionen

  • Faculty of Mechatronics, Armament and Aerospace, Military University of Technology, ul. gen. S. Kaliskiego 2, 00-908 Warsaw, Poland.

ORCID-Profile: Piotr Koniorczyk, Mateusz Zieliński, Janusz Zmywaczyk

Förderung

  • Military University of Technology

Zitieren

APA

Koniorczyk, P., Zieliński, M., & Zmywaczyk, J. (2025). Studies of the Thermophysical Properties of Selected Hot-Working Tool Steels in a Wide Temperature Range. Materials, 18(4), 852. https://doi.org/10.3390/ma18040852

Vancouver

Koniorczyk P, Zieliński M, Zmywaczyk J. Studies of the Thermophysical Properties of Selected Hot-Working Tool Steels in a Wide Temperature Range. Materials. 2025;18(4):852. doi:10.3390/ma18040852

BibTeX
@article{Koniorczyk2025,
  author = {Koniorczyk, Piotr and Zieliński, Mateusz and Zmywaczyk, Janusz},
  title = {Studies of the Thermophysical Properties of Selected Hot-Working Tool Steels in a Wide Temperature Range},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {4},
  pages = {852},
  doi = {10.3390/ma18040852}
}
Kostenlos starten →