Chemical Compatibility of Li1.3Al0.3Ti1.7(PO4)3 Solid-State Electrolyte Co-Sintered with Li4Ti5O12 Anode for Multilayer Ceramic Lithium Batteries
Materials · 15.02.2025 · 18 (4) · 851
DOI: 10.3390/ma18040851 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.02.2025. Verfasst von Jiangtao Li und 8 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Multilayer ceramic lithium batteries (MLCBs) are regarded as a new type of oxide-based all-solid-state microbattery for integrated circuits and various wearable devices. The chemical compatibility between the solid electrolyte and electrode active materials during the high-temperature co-sintering process is crucial for determining the structural stability and cycling performance of MLCBs. This study focuses on the typical MLCB composite electrodes composed of the NASICON-type Li1.3Al0.3Ti1.7(PO4)3 (LATP) solid electrolyte and the spinel-type Li4Ti5O12 (LTO) anode material. The thermal behavior, phase structure, morphological evolution, and elemental chemical states of these composite electrodes were systematically investigated over a co-sintering temperature range of 400–900 °C. The results indicate that the reactivity between LATP and LTO during co-sintering is primarily driven by the diffusion of Li from the LTO anode, leading to the formation of TiO2, Li3PO4, and LiTiOPO4. Furthermore, the co-sintered LATP-LTO multilayer composites reveal that the generation of Li3PO4 at the LATP/LTO interface facilitates their co-sintering integration at 800–900 °C, which is essential for the successful fabrication of MLCBs. These findings provide direct evidence and valuable references for the structural and performance optimization of MLCBs in the future.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 201899, China.
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China.
- State Key Laboratory of Space Power Sources, Shanghai Institute of Space Power-Sources, Shanghai 200245, China.
- Materials Genome Institute, Shanghai University, Shanghai 200444, China.
- School of Engineering, RMIT University, Melbourne 3000, Australia.
ORCID-Profile: Mingsheng Ma, Ya Mao, Jingjing Feng, Yingchun Lyu
Zitieren
APA
Li, J., Ma, M., Mao, Y., Zhang, F., Feng, J., Lyu, Y., Lan, T., Li, Y., & Liu, Z. (2025). Chemical Compatibility of Li1.3Al0.3Ti1.7(PO4)3 Solid-State Electrolyte Co-Sintered with Li4Ti5O12 Anode for Multilayer Ceramic Lithium Batteries. Materials, 18(4), 851. https://doi.org/10.3390/ma18040851
Vancouver
Li J, Ma M, Mao Y, Zhang F, Feng J, Lyu Y, et al. Chemical Compatibility of Li1.3Al0.3Ti1.7(PO4)3 Solid-State Electrolyte Co-Sintered with Li4Ti5O12 Anode for Multilayer Ceramic Lithium Batteries. Materials. 2025;18(4):851. doi:10.3390/ma18040851
BibTeX
@article{Li2025,
author = {Li, Jiangtao and Ma, Mingsheng and Mao, Ya and Zhang, Faqiang and Feng, Jingjing and Lyu, Yingchun and Lan, Tu and Li, Yongxiang and Liu, Zhifu},
title = {Chemical Compatibility of Li1.3Al0.3Ti1.7(PO4)3 Solid-State Electrolyte Co-Sintered with Li4Ti5O12 Anode for Multilayer Ceramic Lithium Batteries},
journal = {Materials},
year = {2025},
volume = {18},
number = {4},
pages = {851},
doi = {10.3390/ma18040851}
}
EUVIMED