Synergistic Effects of Deep Cryogenic and Pulsed Magnetic Field Treatments on the Microstructure and Tensile Properties of Aero-TC4 Titanium Alloy
Materials · 13.02.2025 · 18 (4) · 817
DOI: 10.3390/ma18040817 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.02.2025. Verfasst von Zhijun Ji und 6 weiteren Autor:innen. Beteiligte Einrichtung: AECC Beijing Institute of Aeronautical Materials, Beijing 100095, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Postgraduate Research & Practice Innovation Program of Jiangsu Province.
Abstract (Originalsprache)
A novel coupled processing method (PDCT) that associated deep cryogenic treatment (DCT) with a high pulsed magnetic field (PMT) was investigated to improve the performance of an as-cast TC4 aero-titanium alloy. Through XRD, SEM, TEM, EBSD, and a properties test, its microstructure and tensile properties and their relationship were investigated. The results show that in comparison with the untreated samples, in the PDCT alloys, the amount of nano-sized precipitates and dislocation density are increased, and this phenomenon is characterized by their combed dislocation morphology. The grain sizes are refined and rounded, and the deformed grains are enhanced, together with the enhancement of low-angle grain boundaries in grains and the transformation from the β phase to the α phase. The (112) crystal orientation is apparently strengthened. The tensile strength, elongation, and fracture energy of the optimized PDCT sample are 921.4 MPa, 7.6% and 5.47 × 107 J/m3, which increased by 4.9%, 28.8% and 80.5% compared with the untreated sample, respectively. The tensile fracture exhibits rheological deformation along the phase boundaries. The strength–toughness mechanisms are mainly attributed to the texture, precipitation, dislocation and fine grain strengthening, which stem from the cold contraction and lattice distortion of DCT and the main magneto-plasticity effect of PMT, together with their coupling effects.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- AECC Beijing Institute of Aeronautical Materials, Beijing 100095, China.
- Advanced Titanium Alloy Precision Forming Technology, Beijing 100094, China.
- School of Materials Science & Engineering, Jiangsu University, Zhenjiang 212013, China.
- School of Materials Science & Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China.
ORCID-Profile: Zhijun Ji, Pengjie Zhou
Förderung
- the Postgraduate Research & Practice Innovation Program of Jiangsu Province
Zitieren
APA
Ji, Z., Nan, H., Li, G., Guo, S., Ye, Y., Wang, H., & Zhou, P. (2025). Synergistic Effects of Deep Cryogenic and Pulsed Magnetic Field Treatments on the Microstructure and Tensile Properties of Aero-TC4 Titanium Alloy. Materials, 18(4), 817. https://doi.org/10.3390/ma18040817
Vancouver
Ji Z, Nan H, Li G, Guo S, Ye Y, Wang H, et al. Synergistic Effects of Deep Cryogenic and Pulsed Magnetic Field Treatments on the Microstructure and Tensile Properties of Aero-TC4 Titanium Alloy. Materials. 2025;18(4):817. doi:10.3390/ma18040817
BibTeX
@article{Ji2025,
author = {Ji, Zhijun and Nan, Hai and Li, Guirong and Guo, Shouzuo and Ye, Yurong and Wang, Hongming and Zhou, Pengjie},
title = {Synergistic Effects of Deep Cryogenic and Pulsed Magnetic Field Treatments on the Microstructure and Tensile Properties of Aero-TC4 Titanium Alloy},
journal = {Materials},
year = {2025},
volume = {18},
number = {4},
pages = {817},
doi = {10.3390/ma18040817}
}
EUVIMED