EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In-Plane Strengthening of Unreinforced Masonry Walls with Discrete Glass Fiber-Reinforced Polymer Grid Strips Bonded with Sprayed Polyurea

Piyong Yu, Pedro Silva, Antonio Nanni iD

Materials · 10.02.2025 · 18 (4) · 771

DOI: 10.3390/ma18040771 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.02.2025. Verfasst von Piyong Yu und 2 weiteren Autor:innen. Beteiligte Einrichtung: College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100124, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, unreinforced masonry (URM) walls constructed from concrete blocks and clay bricks were strengthened using horizontally and vertically oriented glass fiber-reinforced polymer (GFRP) grid strips bonded with sprayed polyurea. The walls were subjected to diagonal compression loading until failure. The results demonstrated a significant improvement in both the shear capacity and pseudo-ductility of the strengthened URM walls compared to their unstrengthened counterparts. The primary conclusions drawn from this research are as follows: (1) the maximum strain in the vertical GFRP strips increased with the higher axial stiffness of the strips; (2) the discrete vertical strips contributed substantially to enhancing the shear capacity and pseudo-ductility of the URM walls; (3) increasing the axial stiffness of the vertical strips can alter the failure mode of the walls, shifting it from joint failure to tension or compression failure of the blocks or bricks; (4) a reduction factor is necessary to account for the potential asymmetrical performance of double-sided strengthening schemes applied to URM walls. The experimental program was reported in a previous publication and additional information is presented in this paper.

Schlagwörter

Stichwörter der Autor:innen

GFRP gridURM wallscompressionpolyureastrengtheningstrips

Autor:innen und Institutionen

  • College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100124, China.
  • Department of Civil and Environmental Engineering, George Washington University, Washington, DC 20052, USA.
  • Department of Civil and Architectural Engineering, University of Miami, Coral Gables, FL 33146, USA.

ORCID-Profile: Antonio Nanni

Zitieren

APA

Yu, P., Silva, P., & Nanni, A. (2025). In-Plane Strengthening of Unreinforced Masonry Walls with Discrete Glass Fiber-Reinforced Polymer Grid Strips Bonded with Sprayed Polyurea. Materials, 18(4), 771. https://doi.org/10.3390/ma18040771

Vancouver

Yu P, Silva P, Nanni A. In-Plane Strengthening of Unreinforced Masonry Walls with Discrete Glass Fiber-Reinforced Polymer Grid Strips Bonded with Sprayed Polyurea. Materials. 2025;18(4):771. doi:10.3390/ma18040771

BibTeX
@article{Yu2025,
  author = {Yu, Piyong and Silva, Pedro and Nanni, Antonio},
  title = {In-Plane Strengthening of Unreinforced Masonry Walls with Discrete Glass Fiber-Reinforced Polymer Grid Strips Bonded with Sprayed Polyurea},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {4},
  pages = {771},
  doi = {10.3390/ma18040771}
}
Kostenlos starten →