High-Efficiency Adsorption Removal of Congo Red Dye from Water Using Magnetic NiFe2O4 Nanofibers: An Efficient Adsorbent
Materials · 08.02.2025 · 18 (4) · 754
DOI: 10.3390/ma18040754 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 08.02.2025. Verfasst von Hellen C T Firmino und 8 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Materials Technology (LTM), Department of Materials Engineering, Federal University of Campina Grande, Campina Grande 58429-900, Brazil. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Council for Scientific and Technological Development- CNPq, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) fellowship, National Council for Scientific and Technological Development–CNPq.
Abstract (Originalsprache)
The pollution caused by organic dyes in water bodies has become a major environmental issue, and removing such pernicious dyes presents an immense challenge for the scientific community and governments. In this study, a sorbent based on nickel ferrite (NiFe2O4) fibers was fabricated by the solution blow spinning (SBS) method for the adsorptive removal of anionic Cong red (CR) dye. The cubic–spinel structure and the magnetic and porous nature of NiFe2O4 were confirmed by XRD, magnetometry, BET, and SEM analyses. The saturation magnetization confirmed the magnetic nature of the fibers, which favorably respond to an external magnetic field, facilitating separation from a treated solution. The sorption kinetics of CR on NiFe2O4 were best described by the pseudo-second-order model, while sorption equilibrium agreed best with the Freundlich, Langmuir, Sips, and Temkin isotherm models, suggesting a complex mechanism involving chemisorption, monolayer coverage, and heterogeneous adsorption. The NiFe2O4 fibers annealed at 500 °C showed a high CR removal efficiency of ~97% after only 30 min. The sorbent’s porous structure and high specific surface area were responsible for the improved removal efficiency. Finally, the results indicated the potential of the NiFe2O4 fibers in the remediation of water contaminated with Congo red dye.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory of Materials Technology (LTM), Department of Materials Engineering, Federal University of Campina Grande, Campina Grande 58429-900, Brazil.
- Graduate Program in Materials Science and Engineering, Federal University of Campina Grande, Campina Grande 58429-900, Brazil.
- Department of Chemical Engineering, Federal University of Campina Grande, Campina Grande 58429-900, Brazil.
- Department of Theoretical and Experimental Physics, Federal University of Rio Grande do Norte, Natal 59078-970, Brazil.
ORCID-Profile: Gelmires A Neves, Romualdo R Menezes
Förderung
- National Council for Scientific and Technological Development- CNPq
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) fellowship
- National Council for Scientific and Technological Development–CNPq
Zitieren
APA
Firmino, H. C. T., Nascimento, E. P., Costa, K. C., Arzuza, L. C. C., Araujo, R. N., Sousa, B. V., Neves, G. A., Morales, M. A., & Menezes, R. R. (2025). High-Efficiency Adsorption Removal of Congo Red Dye from Water Using Magnetic NiFe2O4 Nanofibers: An Efficient Adsorbent. Materials, 18(4), 754. https://doi.org/10.3390/ma18040754
Vancouver
Firmino HCT, Nascimento EP, Costa KC, Arzuza LCC, Araujo RN, Sousa BV, et al. High-Efficiency Adsorption Removal of Congo Red Dye from Water Using Magnetic NiFe2O4 Nanofibers: An Efficient Adsorbent. Materials. 2025;18(4):754. doi:10.3390/ma18040754
BibTeX
@article{Firmino2025,
author = {Firmino, Hellen C T and Nascimento, Emanuel P and Costa, Keila C and Arzuza, Luis C C and Araujo, Rondinele N and Sousa, Bianca V and Neves, Gelmires A and Morales, Marco A and Menezes, Romualdo R},
title = {High-Efficiency Adsorption Removal of Congo Red Dye from Water Using Magnetic NiFe2O4 Nanofibers: An Efficient Adsorbent},
journal = {Materials},
year = {2025},
volume = {18},
number = {4},
pages = {754},
doi = {10.3390/ma18040754}
}
EUVIMED