EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Roughness on the Protective Layer Formation Induced by Marine Microorganisms on 5083 Aluminum Alloy

Julien Jaume iD, Marie-Line Délia, Régine Basséguy iD

Materials · 06.02.2025 · 18 (3) · 708

DOI: 10.3390/ma18030708 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.02.2025. Verfasst von Julien Jaume und 2 weiteren Autor:innen. Beteiligte Einrichtung: Chemical Engineering Laboratory (LGC), Université de Toulouse, CNRS, INPT, UPS, 4 Allée E. Monso, 31432 Toulouse, France. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agence Nationale de la Recherche, Ministère de l'Enseignement Supérieur, de la Recherche et de l'Innovation, France, MESRI (Ministère de l’Enseignement Supérieur, de la Recherche et de l’Innovation).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the formation of a protective layer on a 5083 aluminum alloy surface induced by microorganisms from salt marsh. The influence of the initial surface roughness was examined to identify optimal conditions for maximum coverage and thickness of the protective layer. As two opposing effects are suspected, where high surface roughness enhances bacterial adhesion but reduces the resistance to abiotic corrosion, various degrees of roughness were tested. Using electrochemical experiments (OCP measurement, 1/Rp determination, and pitting sensitivity), SEM/TEM observation and EDX characterization, a compromise was found on the initial roughness to obtain a thick protective layer through good bacterial adhesion while minimizing abiotic corrosion. The optimal roughness, achieved through 240-grit grinding, facilitates a uniform distribution of microorganisms and the development of a dense, evenly thick protective layer that significantly enhances the alloy’s resistance to pitting corrosion. The passivity domain doubled when comparing the electrochemical behavior of electrodes immersed in the presence of microbial activity to those immersed without it.

Schlagwörter

Stichwörter der Autor:innen

aluminum alloybiomineralizationmarine corrosionmicrobially induced protectionsalt marsh microorganismssurface modificationsurface roughness

Autor:innen und Institutionen

  • Chemical Engineering Laboratory (LGC), Université de Toulouse, CNRS, INPT, UPS, 4 Allée E. Monso, 31432 Toulouse, France.

ORCID-Profile: Julien Jaume, Régine Basséguy

Förderung

  • Agence Nationale de la Recherche
  • Ministère de l'Enseignement Supérieur, de la Recherche et de l'Innovation, France
  • MESRI (Ministère de l’Enseignement Supérieur, de la Recherche et de l’Innovation)

Zitieren

APA

Jaume, J., Délia, M. L., & Basséguy, R. (2025). The Influence of Roughness on the Protective Layer Formation Induced by Marine Microorganisms on 5083 Aluminum Alloy. Materials, 18(3), 708. https://doi.org/10.3390/ma18030708

Vancouver

Jaume J, Délia ML, Basséguy R. The Influence of Roughness on the Protective Layer Formation Induced by Marine Microorganisms on 5083 Aluminum Alloy. Materials. 2025;18(3):708. doi:10.3390/ma18030708

BibTeX
@article{Jaume2025,
  author = {Jaume, Julien and Délia, Marie-Line and Basséguy, Régine},
  title = {The Influence of Roughness on the Protective Layer Formation Induced by Marine Microorganisms on 5083 Aluminum Alloy},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {708},
  doi = {10.3390/ma18030708}
}
Kostenlos starten →