EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Hot Isostatic Pressing on the Mechanical Properties of Ti-6Al-4V Samples Printed Using the LENS Method

Bożena Gzik-Zroska iD, Kamil Joszko iD, Agata Piątek, Wojciech Wolański iD, Edyta Kawlewska iD, Arkadiusz Szarek iD, Wojciech Kajzer iD, Grzegorz Stradomski iD

Materials · 29.01.2025 · 18 (3) · 612

DOI: 10.3390/ma18030612 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.01.2025. Verfasst von Bożena Gzik-Zroska und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, 41-800 Zabrze, Pola…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Funds for Silesia 2021-2027, European Funds for Silesia 2021–2027 Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this work was to assess the influence of the parameters of the hot isostatic pressing (HIP) process and the direction of printing of Ti-6Al-4V samples made using the laser-engineered net shaping (LENS) method on strength properties. The tests were carried out using a static testing machine and a digital image correlation system. Samples before and after the HIP process were tested. The HIP process was carried out at a temperature of 1150 °C, a heating time of 240 min and various pressure values of 500, 1000 and 1500 bar. Based on the comparative analysis of the test results, it has been shown that the ability to adjust the parameters of the HIP process has a significant impact on the final mechanical properties of the samples.

Schlagwörter

Stichwörter der Autor:innen

3D printing parametersdigital image correlationstatic tensile testtitanium alloy

Autor:innen und Institutionen

  • Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, 41-800 Zabrze, Poland.
  • Department of Biomechatronics, Faculty of Biomedical Engineering, Silesian University of Technology, 41-800 Zabrze, Poland.
  • SKN "Biokreatywni", Faculty of Biomedical Engineering, Silesian University of Technology, 41-800 Zabrze, Poland.
  • Department of Technology and Automation, Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, 42-200 Częstochowa, Poland.
  • Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, 42-201 Częstochowa, Poland.

ORCID-Profile: Bożena Gzik-Zroska, Kamil Joszko, Wojciech Wolański, Edyta Kawlewska, Arkadiusz Szarek, Wojciech Kajzer, Grzegorz Stradomski

Förderung

  • European Funds for Silesia 2021-2027
  • European Funds for Silesia 2021–2027 Program

Zitieren

APA

Gzik-Zroska, B., Joszko, K., Piątek, A., Wolański, W., Kawlewska, E., Szarek, A., Kajzer, W., & Stradomski, G. (2025). The Influence of Hot Isostatic Pressing on the Mechanical Properties of Ti-6Al-4V Samples Printed Using the LENS Method. Materials, 18(3), 612. https://doi.org/10.3390/ma18030612

Vancouver

Gzik-Zroska B, Joszko K, Piątek A, Wolański W, Kawlewska E, Szarek A, et al. The Influence of Hot Isostatic Pressing on the Mechanical Properties of Ti-6Al-4V Samples Printed Using the LENS Method. Materials. 2025;18(3):612. doi:10.3390/ma18030612

BibTeX
@article{GzikZroska2025,
  author = {Gzik-Zroska, Bożena and Joszko, Kamil and Piątek, Agata and Wolański, Wojciech and Kawlewska, Edyta and Szarek, Arkadiusz and Kajzer, Wojciech and Stradomski, Grzegorz},
  title = {The Influence of Hot Isostatic Pressing on the Mechanical Properties of Ti-6Al-4V Samples Printed Using the LENS Method},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {612},
  doi = {10.3390/ma18030612}
}
Kostenlos starten →