EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of Grain Size and Distribution in Fe-B-C Alloy Using Optical Microscopy and Image Analysis

Lenka Křivánková, Rostislav Chotěborský iD, Barbora Černilová iD, Miloslav Linda iD

Materials · 28.01.2025 · 18 (3) · 596

DOI: 10.3390/ma18030596 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.01.2025. Verfasst von Lenka Křivánková und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Science Prague, Kamýcká 129, 165 00 Pra…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Internal grant agency of Faculty of Engineering., internal grant agency of the Faculty of Engineering.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The size and morphology of the grains of a material and their distribution have a significant impact on the mechanical properties of the material (and their further application). Based on the data obtained from image analysis, it is possible to modify the microstructure of materials. Within the formation of a eutectic, borides occur along the austenite grain boundary. The cell size can be managed by technological process (forming) or by adding chemical elements. In this paper, a method of measuring the cell size of a hypoeutectic Fe-B-C alloy across the entire examined cross-section of the sample was researched by creating a mosaic from individual frames. Sample preparation allowing clear grain boundary visibility was essential. It was observed that the most effective results were achieved with quenched microstructures etched using Klemm I color etchant. A Zeiss optic microscope with AxioVision software (AxioVision SE64 Rel. 4.9.1.) was used for image acquisition, and mosaics were created using MosaiX software. This study revealed that, before further processing, images must be segmented to address color inconsistencies using average grayscale values. This preprocessing step enabled precise cell size analysis through an algorithm implemented in Scilab. The developed methodology was used to create sample maps for determining the grain size and its distribution in the Fe-B alloy. This automated approach provides a comprehensive dataset, enabling detailed analysis of both individual images and the entire sample. Manual grain size measurements were performed for verification, and statistical analysis demonstrated a close correspondence between the results. The results confirmed a significant impact of the added alloying elements on microstructural homogeneity in hypoeutectic Fe-B-C alloys. Homogeneity decreases with the addition of alloying elements such as chromium and vanadium, while tungsten contributes to a more stable grain size. A low gradient value shows small grain size changes from the core to the edge in the cross-section. Furthermore, the results show that higher amounts of chromium increase the average grain size values. The results demonstrate that automated methods allow for comprehensive analysis of the entire sample, enabling precise determination of grain size and other properties across the entire object rather than only on subjectively selected areas. This approach effectively eliminates the influence of human error, ensuring more reliable and consistent data.

Schlagwörter

Stichwörter der Autor:innen

Fe-B alloyscell sizeimage analysismicrostructure measurement

Autor:innen und Institutionen

  • Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Science Prague, Kamýcká 129, 165 00 Prague 6-Suchdol, Czech Republic.
  • Department of Electrical Engineering and Automation, Faculty of Engineering, Czech University of Life Sciences Prague, Kamýcká 129, 165 00 Prague 6-Suchdol, Czech Republic.

ORCID-Profile: Rostislav Chotěborský, Barbora Černilová, Miloslav Linda

Förderung

  • Internal grant agency of Faculty of Engineering.
  • internal grant agency of the Faculty of Engineering

Zitieren

APA

Křivánková, L., Chotěborský, R., Černilová, B., & Linda, M. (2025). Analysis of Grain Size and Distribution in Fe-B-C Alloy Using Optical Microscopy and Image Analysis. Materials, 18(3), 596. https://doi.org/10.3390/ma18030596

Vancouver

Křivánková L, Chotěborský R, Černilová B, Linda M. Analysis of Grain Size and Distribution in Fe-B-C Alloy Using Optical Microscopy and Image Analysis. Materials. 2025;18(3):596. doi:10.3390/ma18030596

BibTeX
@article{Kivnkov2025,
  author = {Křivánková, Lenka and Chotěborský, Rostislav and Černilová, Barbora and Linda, Miloslav},
  title = {Analysis of Grain Size and Distribution in Fe-B-C Alloy Using Optical Microscopy and Image Analysis},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {596},
  doi = {10.3390/ma18030596}
}
Kostenlos starten →