EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Porosity on Tribological Properties of Medical-Grade 316L Stainless Steel Manufactured by Laser-Based Powder Bed Fusion

Germán Omar Barrionuevo iD, Magdalena Walczak, Patricio Mendez iD, Iván La Fé-Perdomo iD, Erika Chiluisa-Palomo, Wilson Navas-Pinto iD, Duncan E Cree iD

Materials · 26.01.2025 · 18 (3) · 568

DOI: 10.3390/ma18030568 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.01.2025. Verfasst von Germán Omar Barrionuevo und 6 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ciencias de la Energía y Mecánica, Universidad de las Fuerzas Armadas ESPE, Sangolquí 171103, Ecuador. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Secretaría de Educación Superior, Ciencia, Tecnología e Innovación, Agencia Nacional de Investigación y Desarrollo (ANID), Universidad de las Fuerzas Armadas ESPE.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The potential of laser-based powder bed fusion (L-PBF) technology for producing functional components relies on its capability of maintaining or even improving the mechanical properties of the processed material. This improvement is associated with the microstructure resulting from the high thermal gradient and fast cooling rate. However, this microstructural advantage may be counterbalanced by the lack of full density, which could be tolerated to a certain degree for applications such as biomedical implants and medical equipment. In this study, medical-grade 316L stainless steel specimens with porosities ranging from 1.7 to 9.1% were additively manufactured by L-PBF using different combinations of laser power and scanning speeds. Tribological properties were evaluated by pin-on-disc testing in dry conditions against a silicon nitride test body and analyzed in the context of microstructural characterization by optical and electron microscopy. The results reveal that higher porosity allows for a diminishing wear rate, which is explained by the capacity of the pores to retain wear debris related with the three-body abrasion. This research provides practical insights into the design of medical wear-resistant components, thereby enhancing our understanding of the potential of L-PBF in the fields of materials science and biomedical engineering.

Schlagwörter

Stichwörter der Autor:innen

316L stainless steelbiomedical materialslaser powder bed fusionporositytribologywear

Autor:innen und Institutionen

  • Departamento de Ciencias de la Energía y Mecánica, Universidad de las Fuerzas Armadas ESPE, Sangolquí 171103, Ecuador.
  • Department of Engineering, Universidad Católica del Uruguay, Av. 8 de octubre 2738, Montevideo 11600, Uruguay.
  • Department of Mechanical and Metallurgical Engineering, School of Engineering, Pontificia Universidad Católica de Chile, Av. Vicuña Mackenna 4860, Santiago 7820436, Chile.
  • Chemical and Materials Engineering Department, University of Alberta, Edmonton, AB T6G 2R3, Canada.
  • Escuela de Ingeniería Mecánica, Pontificia Universidad Católica de Valparaíso, Valparaíso 2340025, Chile.
  • Facultad de Ciencias de la Ingeniería y Aplicadas, Universidad Técnica de Cotopaxi, Latacunga 050101, Ecuador.

ORCID-Profile: Germán Omar Barrionuevo, Patricio Mendez, Iván La Fé-Perdomo, Wilson Navas-Pinto, Duncan E Cree

Förderung

  • Secretaría de Educación Superior, Ciencia, Tecnología e Innovación
  • Agencia Nacional de Investigación y Desarrollo (ANID)
  • Universidad de las Fuerzas Armadas ESPE

Zitieren

APA

Barrionuevo, G. O., Walczak, M., Mendez, P., La Fé-Perdomo, I., Chiluisa-Palomo, E., Navas-Pinto, W., & Cree, D. E. (2025). Effect of Porosity on Tribological Properties of Medical-Grade 316L Stainless Steel Manufactured by Laser-Based Powder Bed Fusion. Materials, 18(3), 568. https://doi.org/10.3390/ma18030568

Vancouver

Barrionuevo GO, Walczak M, Mendez P, La Fé-Perdomo I, Chiluisa-Palomo E, Navas-Pinto W, et al. Effect of Porosity on Tribological Properties of Medical-Grade 316L Stainless Steel Manufactured by Laser-Based Powder Bed Fusion. Materials. 2025;18(3):568. doi:10.3390/ma18030568

BibTeX
@article{Barrionuevo2025,
  author = {Barrionuevo, Germán Omar and Walczak, Magdalena and Mendez, Patricio and La Fé-Perdomo, Iván and Chiluisa-Palomo, Erika and Navas-Pinto, Wilson and Cree, Duncan E},
  title = {Effect of Porosity on Tribological Properties of Medical-Grade 316L Stainless Steel Manufactured by Laser-Based Powder Bed Fusion},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {568},
  doi = {10.3390/ma18030568}
}
Kostenlos starten →