EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Polymethyl Methacrylate as a Provisional Material in a Fully Digital Workflow for Immediate-Load Complete-Arch Implant-Supported Prostheses over Three Months

Luis Carlos Garza iD, Eduardo Crooke, Marta Vallés iD, Joan Soliva, Xavier Rodríguez, Mariona Rodeja iD, Miguel Roig iD

Materials · 26.01.2025 · 18 (3) · 562

DOI: 10.3390/ma18030562 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.01.2025. Verfasst von Luis Carlos Garza und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Restorative Dentistry, Universitat Internacional de Catalunya, 08195 Barcelona, Spain. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sociedad Española de Prótesis Estomatológica.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

While complete-arch digital-implant-scanning protocols have been described, their clinical outcomes when using polymethyl methacrylate (PMMA) as a provisional material remain insufficiently substantiated. This clinical study aims to integrate digital solutions into implant dentistry and establish PMMA as a reliable material for immediate-loaded protocols. Fifty-six patients received 432 implants and 72 immediate fixed interim complete-arch prostheses, all fabricated using a fully digital workflow. Patients were followed up at 3 months to evaluate implant survival, prosthesis survival, and implant mean marginal bone loss using an interim PMMA prosthesis. Patients completed the Oral Health Impact Profile (OHIP) questionnaire to determine the implants’ impact on quality of life. Statistical analyses included analysis of variance, Fisher’s least significant difference (LSD) test, and the Wilcoxon signed-rank test. Of the 432 implants placed, only two failures were observed. Marginal bone loss (MBL) was significantly greater in male patients (p = 0.002) and older smokers (p = 0.016). Patient-reported outcomes, as measured by the OHIP questionnaire, demonstrated significant improvements in quality of life. PMMA is a reliable material for immediate-loading protocols in fixed interim complete-arch implant prostheses. Its combination of mechanical strength, biocompatibility, and esthetic properties, along with the accuracy of fully digital workflows, ensures predictable clinical outcomes.

Schlagwörter

Stichwörter der Autor:innen

fully digital workflowinterim complete-arch prosthesesmarginal bone losspolymethyl methacrylate

Autor:innen und Institutionen

  • Department of Restorative Dentistry, Universitat Internacional de Catalunya, 08195 Barcelona, Spain.
  • Private Practice, 29016 Málaga, Spain.
  • Department of Oral Surgery, Universitat Internacional de Catalunya, 08195 Barcelona, Spain.

ORCID-Profile: Luis Carlos Garza, Marta Vallés, Mariona Rodeja, Miguel Roig

Förderung

  • Sociedad Española de Prótesis Estomatológica

Zitieren

APA

Garza, L. C., Crooke, E., Vallés, M., Soliva, J., Rodríguez, X., Rodeja, M., & Roig, M. (2025). Evaluation of Polymethyl Methacrylate as a Provisional Material in a Fully Digital Workflow for Immediate-Load Complete-Arch Implant-Supported Prostheses over Three Months. Materials, 18(3), 562. https://doi.org/10.3390/ma18030562

Vancouver

Garza LC, Crooke E, Vallés M, Soliva J, Rodríguez X, Rodeja M, et al. Evaluation of Polymethyl Methacrylate as a Provisional Material in a Fully Digital Workflow for Immediate-Load Complete-Arch Implant-Supported Prostheses over Three Months. Materials. 2025;18(3):562. doi:10.3390/ma18030562

BibTeX
@article{Garza2025,
  author = {Garza, Luis Carlos and Crooke, Eduardo and Vallés, Marta and Soliva, Joan and Rodríguez, Xavier and Rodeja, Mariona and Roig, Miguel},
  title = {Evaluation of Polymethyl Methacrylate as a Provisional Material in a Fully Digital Workflow for Immediate-Load Complete-Arch Implant-Supported Prostheses over Three Months},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {562},
  doi = {10.3390/ma18030562}
}
Kostenlos starten →