EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Meltblow Processing of Poly (Ethylene Furanoate)–Bio-Based Polyester Nonwovens

Tim Hiller iD, Hagen J Altmann iD, Iris Elser, Mehdi Azimian, Michael R Buchmeiser iD

Materials · 24.01.2025 · 18 (3) · 544

DOI: 10.3390/ma18030544 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.01.2025. Verfasst von Tim Hiller und 4 weiteren Autor:innen. Beteiligte Einrichtung: German Institutes of Textile and Fiber Research Denkendorf, Koerschtal Str. 26, 73770 Denkendorf, Germany. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry of Education and Research, BMBF (Bundesministerium für Bildung und Forschung).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly(ethylene furanoate) (PEF) has been identified as a bio-based alternative or supplement to poly(ethylene terephthalate) (PET) for various applications such as food packaging and bottles as well as technical- and high-performance fibers and yarns. In this study, the processing of PEF nonwovens in the meltblow process is successfully demonstrated and reported for the first time, according to our best knowledge The resulting fabrics achieved median fiber diameters of 2.04 µm, comparable to PET. The filtration efficiency of 25 g m−2 fabrics exceeded 50% comparable to PET and PBT of the same grammage and was raised to over 90% with post-process electrostatic charging, maintaining stability. As for other aromatic polymers, applying infrared heating modules into the process indicated the potential to minimize heat shrinkage. However, the suppressed ring rotation and slower crystallization kinetics of PEF showed the need for longer post-treatment times as the heat shrinkage remained between 20% and 40% at 10 °C. Overcoming this, PEF can be a viable, bio-based alternative to PET, particularly for such high-temperature nonwoven applications that require thin layers.

Schlagwörter

Stichwörter der Autor:innen

2,5-furan dicarboxylic acid (FDCA)biopolymermelt processingmeltblownonwovenspolycondensationpolyesterpolyethylene furanoate (PEF)polymerrheology

Autor:innen und Institutionen

  • German Institutes of Textile and Fiber Research Denkendorf, Koerschtal Str. 26, 73770 Denkendorf, Germany.
  • Institute for Polymer Chemistry, University of Stuttgart, Pfaffenwaldring 55, 70569 Stuttgart, Germany.

ORCID-Profile: Tim Hiller, Hagen J Altmann, Michael R Buchmeiser

Förderung

  • Federal Ministry of Education and Research
  • BMBF (Bundesministerium für Bildung und Forschung)

Zitieren

APA

Hiller, T., Altmann, H. J., Elser, I., Azimian, M., & Buchmeiser, M. R. (2025). Meltblow Processing of Poly (Ethylene Furanoate)–Bio-Based Polyester Nonwovens. Materials, 18(3), 544. https://doi.org/10.3390/ma18030544

Vancouver

Hiller T, Altmann HJ, Elser I, Azimian M, Buchmeiser MR. Meltblow Processing of Poly (Ethylene Furanoate)–Bio-Based Polyester Nonwovens. Materials. 2025;18(3):544. doi:10.3390/ma18030544

BibTeX
@article{Hiller2025,
  author = {Hiller, Tim and Altmann, Hagen J and Elser, Iris and Azimian, Mehdi and Buchmeiser, Michael R},
  title = {Meltblow Processing of Poly (Ethylene Furanoate)–Bio-Based Polyester Nonwovens},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {544},
  doi = {10.3390/ma18030544}
}
Kostenlos starten →