Residual Stress in Friction Stir Welding of Dissimilar Aluminum Alloys: A Parametric Study
Materials · 12.01.2025 · 18 (2) · 316
DOI: 10.3390/ma18020316 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 12.01.2025. Verfasst von Zulqarnain Sarfaraz und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering (CEME), National University of Sciences and Technology (NUST), Sector H-12, Islamabad 46000, Pakistan. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Welding-induced residual stress has the capacity to significantly compromise the integrity of mechanical components. Its minimization therefore plays a critical role in the selection of process parameters during the welding process. Friction stir welding is a useful joining technique to weld many materials that are not amenable to the traditional welding techniques. Using a sequentially coupled thermomechanical three-dimensional finite element simulation, this work aimed to quantitatively evaluate the influence of the tool rotational and traverse speeds on the generation of residual stress in the friction stir welding of dissimilar aluminum alloys AA2024−T3 and AA5086−O. The model was validated using established experimental and numerical results. The procedure entailed an initial thermal analysis, the results of which were superposed on a mechanical model to determine the distribution of the residual stress across the welded alloy. The results showed that longitudinal residual stress was dominant as compared to lateral stress. It was also demonstrated that, although the tool rotational speed and the tool traverse speed both affected the post-weld temperature distribution and consequently the longitudinal residual stress, the influence of the former was more substantial. Furthermore, the peak values of the residual stress were found on the retreating side (AA5086−O), making it more critical for the selection of welding process parameters.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering (CEME), National University of Sciences and Technology (NUST), Sector H-12, Islamabad 46000, Pakistan.
- Mechanical Engineering Department, University of Engineering and Technology, Taxila 47050, Pakistan.
- Faculty of Mechanical Engineering, Institute of Applied Mechanics, Poznan University of Technology, 3 Piotrowo St., 60-965 Poznan, Poland.
ORCID-Profile: Hasan Aftab Saeed, Rehan Khan, Michał Wieczorowski, Naveed Akmal Din
Zitieren
APA
Sarfaraz, Z., Awan, Y. R., Saeed, H. A., Khan, R., Wieczorowski, M., & Din, N. A. (2025). Residual Stress in Friction Stir Welding of Dissimilar Aluminum Alloys: A Parametric Study. Materials, 18(2), 316. https://doi.org/10.3390/ma18020316
Vancouver
Sarfaraz Z, Awan YR, Saeed HA, Khan R, Wieczorowski M, Din NA. Residual Stress in Friction Stir Welding of Dissimilar Aluminum Alloys: A Parametric Study. Materials. 2025;18(2):316. doi:10.3390/ma18020316
BibTeX
@article{Sarfaraz2025,
author = {Sarfaraz, Zulqarnain and Awan, Yasser Riaz and Saeed, Hasan Aftab and Khan, Rehan and Wieczorowski, Michał and Din, Naveed Akmal},
title = {Residual Stress in Friction Stir Welding of Dissimilar Aluminum Alloys: A Parametric Study},
journal = {Materials},
year = {2025},
volume = {18},
number = {2},
pages = {316},
doi = {10.3390/ma18020316}
}
EUVIMED