EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure, Hardness, and Wear Behavior of Layers Obtained by Electric Arc Hardfacing Processes

Sebastian Balos iD, Danka Labus Zlatanović, Petar Janjatović iD, Milan Pećanac iD, Olivera Erić Cekić, Milena Rosić iD, Srećko Stopić

Materials · 10.01.2025 · 18 (2) · 299

DOI: 10.3390/ma18020299 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.01.2025. Verfasst von Sebastian Balos und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Production Engineering, Faculty of Technical Sciences, University of Novi Sad, Trg Dositeja Obradovica 6, 21000 Novi Sad, Serbia. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Ministry of Science, Technological Development and Innovation of the Republic of Serbia, Ministry of Science, Technological Development and Innovation of the Republic of Serbia, Faculty of Mechanical and Civil Engineering in Kraljevo, University of Kragujevac.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hardfacing is a welding-related technique aimed at depositing a harder and tougher layer onto a softer, less wear-resistant substrate or base metal. This process enhances the abrasion resistance of the component, increasing its durability under working conditions. A key feature of hardfacing is dilution, which refers to the mixing of the hardfacing layer and the base metal. In this study, shielded metal arc welding (SMAW) was employed to hardface structural steel using chromium carbide vanadium consumables, with results compared to AISI D2 cold-work tool steel. Four different SMAW parameters were tested, and the abrasive test was conducted against SiC discs. Wear rate, represented by the wear loss rate, was correlated to microstructure, scanning electron microscopy, energy-dispersive X-ray spectroscopy, hardness, microhardness, and surface roughness. The results showed that key SMAW parameters, such as welding speed and current, significantly influence wear resistance. Specifically, slower welding speeds and higher currents, which result in greater heat input, led to the increased wear resistance of the deposited layer through the mechanism of the inoculation of larger and harder carbides.

Schlagwörter

Stichwörter der Autor:innen

abrasive wear resistancehardfacingmicrohardnessmicrostructureshielded metal arc welding

Autor:innen und Institutionen

  • Department of Production Engineering, Faculty of Technical Sciences, University of Novi Sad, Trg Dositeja Obradovica 6, 21000 Novi Sad, Serbia.
  • Department of Production Technology, Technische Universität Ilmenau, 98693 Ilmenau, Germany.
  • Innovation Center, Faculty of Mechanical Engineering, University of Belgrade, Kraljice Marije 16, 11120 Belgrade, Serbia.
  • Faculty of Mechanical and Civil Engineering in Kraljevo, University of Kragujevac, Dositejeva 19, 36000 Kraljevo, Serbia.
  • "Vinča" Institute of Nuclear Sciences, National Institute of the Republic of Serbia, University of Belgrade, Mike Petrovića Alasa 12-14, 11351 Belgrade, Serbia.
  • IME Process Metallurgy and Metal Recycling, RWTH Aachen University, Intzestraße 3, 52056 Aachen, Germany.

ORCID-Profile: Sebastian Balos, Petar Janjatović, Milan Pećanac, Milena Rosić

Förderung

  • The Ministry of Science, Technological Development and Innovation of the Republic of Serbia
  • Ministry of Science, Technological Development and Innovation of the Republic of Serbia
  • Faculty of Mechanical and Civil Engineering in Kraljevo, University of Kragujevac
  • Innovation Centre of the Faculty of Mechanical Engineering, Belgrade, University of Belgrade
  • “Vinča” Institute of Nuclear Sciences—National Institute of the Republic of Serbia, University of Belgrade

Zitieren

APA

Balos, S., Zlatanović, D. L., Janjatović, P., Pećanac, M., Erić Cekić, O., Rosić, M., & Stopić, S. (2025). Microstructure, Hardness, and Wear Behavior of Layers Obtained by Electric Arc Hardfacing Processes. Materials, 18(2), 299. https://doi.org/10.3390/ma18020299

Vancouver

Balos S, Zlatanović DL, Janjatović P, Pećanac M, Erić Cekić O, Rosić M, et al. Microstructure, Hardness, and Wear Behavior of Layers Obtained by Electric Arc Hardfacing Processes. Materials. 2025;18(2):299. doi:10.3390/ma18020299

BibTeX
@article{Balos2025,
  author = {Balos, Sebastian and Zlatanović, Danka Labus and Janjatović, Petar and Pećanac, Milan and Erić Cekić, Olivera and Rosić, Milena and Stopić, Srećko},
  title = {Microstructure, Hardness, and Wear Behavior of Layers Obtained by Electric Arc Hardfacing Processes},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {2},
  pages = {299},
  doi = {10.3390/ma18020299}
}
Kostenlos starten →