Computational Study of Chalcogenide-Based Perovskite Solar Cell Using SCAPS-1D Numerical Simulator
Materials · 04.01.2025 · 18 (1) · 186
DOI: 10.3390/ma18010186 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 04.01.2025. Verfasst von Edson L Meyer und 4 weiteren Autor:innen. Beteiligte Einrichtung: Fort Hare Institute of Technology, University of Fort Hare, Private Bag X1314, Alice 5700, Eastern Cape, South Africa. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Science and Innovation, the National Research Foundation, Govan Mbeki Research and Development Centre (GMRDC) at the University of Fort Hare, PV Spoke.
Abstract (Originalsprache)
Perovskite solar cells (PSCs) are regarded as extremely efficient and have significant potential for upcoming photovoltaic technologies due to their excellent optoelectronic properties. However, a few obstacles, which include the instability and high costs of production of lead-based PSCs, hinder their commercialization. In this study, the performance of a solar cell with a configuration of FTO/CdS/BaZrS3/HTL/Ir was optimized by varying the thickness of the perovskite layer, the hole transport layer, the temperature, the electron transport layer (ETL)’s defect density, the absorber defect density, the energy band, and the work function for back contact. Various hole transport layers (HTLs), including Cu2O, CuSCN, P3HT, and PEDOT:PSS, were assessed to select the best materials that would achieve high performance and stability in PSC devices. At optimal levels, PEDOT:PSS reached a maximum power conversion efficiency (PCE) of 18.50%, while P3HT, CuSCN, and Cu2O exhibited a PCE of 5.81, 10.73, and 9.80%, respectively. The high performance exhibited by PEDOT:PSS was attributed to better band alignment between the absorber and the PEDOT:PSS, and, thus, a low recombination of photogenerated charges. The other photovoltaic parameters for the best device were a short-circuit current density (Jsc) of 23.46 mA cm−2, an open-circuit voltage (Voc) of 8.86 (V), and a fill factor (FF) of 8.90%. This study highlights the potential of chalcogenide-based PSCs as an efficient and stable alternative to traditional lead-based solar cells, with successful optimization paving the way for future research on eco-friendly materials and scalable production methods.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Fort Hare Institute of Technology, University of Fort Hare, Private Bag X1314, Alice 5700, Eastern Cape, South Africa.
- Department of Chemistry, University of Fort Hare, Private Bag X1314, Alice 5700, Eastern Cape, South Africa.
ORCID-Profile: Edson L Meyer, Nicholas Rono, Mojeed A Agoro
Förderung
- Department of Science and Innovation, the National Research Foundation
- Govan Mbeki Research and Development Centre (GMRDC) at the University of Fort Hare
- PV Spoke
- Isondo precious metal
- National Research Foundation
- Govan Mbeki Research and Development Centre (GMRDC) at the University of Fort Hare, South Africa
Zitieren
APA
Meyer, E. L., Mvokwe, S. A., Oyedeji, O. O., Rono, N., & Agoro, M. A. (2025). Computational Study of Chalcogenide-Based Perovskite Solar Cell Using SCAPS-1D Numerical Simulator. Materials, 18(1), 186. https://doi.org/10.3390/ma18010186
Vancouver
Meyer EL, Mvokwe SA, Oyedeji OO, Rono N, Agoro MA. Computational Study of Chalcogenide-Based Perovskite Solar Cell Using SCAPS-1D Numerical Simulator. Materials. 2025;18(1):186. doi:10.3390/ma18010186
BibTeX
@article{Meyer2025,
author = {Meyer, Edson L and Mvokwe, Sinikiwe A and Oyedeji, Opeoluwa O and Rono, Nicholas and Agoro, Mojeed A},
title = {Computational Study of Chalcogenide-Based Perovskite Solar Cell Using SCAPS-1D Numerical Simulator},
journal = {Materials},
year = {2025},
volume = {18},
number = {1},
pages = {186},
doi = {10.3390/ma18010186}
}
EUVIMED