The Potential of Using Shungite Mineral from Eastern Kazakhstan in Formulations for Rubber Technical Products
Materials · 30.12.2024 · 18 (1) · 114
DOI: 10.3390/ma18010114 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 30.12.2024. Verfasst von Sergey V Nechipurenko und 9 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Chemistry and Chemical Technology, Al-Farabi Kazakh National University, Almaty 050040, Kazakhstan. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
This study examined the effect of partially replacing semi-reinforcing carbon black grade N550 (up to 10 pts. wt.) and fully replacing industrial chalk with natural shungite mineral in industrial formulations of elastomer compositions intended for manufacturing various rubber technical products. It has been shown that due to the high content of carbon and silicon components in the composition of shungite mineral micropowders, their use as a filler in elastomer formulations significantly improves the physical and mechanical properties of rubber technical products (RTPs) manufactured using such compositions. It was determined that the use of SM as a partial replacement for carbon black in rubbers intended for molded rubber technical products contributes to a reduction in Mooney viscosity (up to 26.8%) and optimal vulcanization time (up to 23.7%), achieving rubbers with the required set of physical–mechanical properties and with an enhancing sealing capability (up to 19.7%). It has been established that the use of shungite mineral micropowders as a complete replacement for industrial chalk increases the strength of rubber products (RTPs) by up to 18.5% and enhances their resistance to liquid aggressive environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Chemistry and Chemical Technology, Al-Farabi Kazakh National University, Almaty 050040, Kazakhstan.
- National Engineering Academy of the Republic of Kazakhstan, Almaty 050010, Kazakhstan.
- Department of Polymer Composite Materials, Faculty of Technology of Organic Substances, Belarusian State Technological University, 220006 Minsk, Belarus.
- K. Turysov Institute of Geology and Oil and Gas Engineering, Satbayev University, Almaty 050000, Kazakhstan.
ORCID-Profile: Sergey V Nechipurenko, Danelya N Makhayeva, Grigoriy A Mun
Förderung
- Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Nechipurenko, S. V., Bobrova, V. V., Kasperovich, A. V., Yermaganbetov, M. Y., Yefremov, S. A., Kaiaidarova, A. K., Makhayeva, D. N., Yermukhambetova, B. B., Mun, G. A., & Irmukhametova, G. S. (2024). The Potential of Using Shungite Mineral from Eastern Kazakhstan in Formulations for Rubber Technical Products. Materials, 18(1), 114. https://doi.org/10.3390/ma18010114
Vancouver
Nechipurenko SV, Bobrova VV, Kasperovich AV, Yermaganbetov MY, Yefremov SA, Kaiaidarova AK, et al. The Potential of Using Shungite Mineral from Eastern Kazakhstan in Formulations for Rubber Technical Products. Materials. 2024;18(1):114. doi:10.3390/ma18010114
BibTeX
@article{Nechipurenko2024,
author = {Nechipurenko, Sergey V and Bobrova, Valeriya V and Kasperovich, Andrey V and Yermaganbetov, Mubarak Ye and Yefremov, Sergey A and Kaiaidarova, Aigerim K and Makhayeva, Danelya N and Yermukhambetova, Bayana B and Mun, Grigoriy A and Irmukhametova, Galiya S},
title = {The Potential of Using Shungite Mineral from Eastern Kazakhstan in Formulations for Rubber Technical Products},
journal = {Materials},
year = {2024},
volume = {18},
number = {1},
pages = {114},
doi = {10.3390/ma18010114}
}
EUVIMED