EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Compressive Mechanical Properties of Bio-Inspired Lattice Metamaterials with Taper Struts

Shuangyin Yuan, Bingke Song, Gang Liu, Biqi Yang, Mingqiu Dai, Zetian Gao, Shan Cao, Miao Zhao

Materials · 25.12.2024 · 18 (1) · 29

DOI: 10.3390/ma18010029 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.12.2024. Verfasst von Shuangyin Yuan und 7 weiteren Autor:innen. Beteiligte Einrichtung: Suzhou XDM 3D Printing Technology Co., Ltd., Suzhou 215000, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The stress distribution within the struts of lattice metamaterials is non-uniform under compressive loads, with stress concentrations typically occurring at the node regions. Inspired by bamboo, this study proposes a type of body-centered cubic (BCC) lattice metamaterial with tapered prism struts (BCCT). The compressive behavior, deformation modes, mechanical properties, and failure mechanisms of BCCT lattice metamaterials are systematically analyzed using finite element methods and validated through compression tests. Parametric analysis is conducted to investigate the effects of key design parameters, including volume fraction, shape parameter, and material properties. The results reveal that BCCT lattice metamaterials effectively eliminate stress concentration at nodes by redistributing stress toward the center of the struts. This redistribution changes the failure mode from shear band failure to layer collapse, while the struts maintain a bending-dominated deformation mechanism under compression. The mechanical properties of BCCT lattice metamaterials are significantly influenced by the shape factor. Furthermore, the mechanical properties of BCCT lattice metamaterials with different volume fractions and materials are consistently superior to BCC ones, which verifies the effectiveness and adaptability of lattice metamaterials with taper prismatic struts for potential lightweight applications.

Schlagwörter

Stichwörter der Autor:innen

deformation behaviorlattice metamaterialsmechanical propertiestaper struts

Autor:innen und Institutionen

  • Suzhou XDM 3D Printing Technology Co., Ltd., Suzhou 215000, China.
  • Shanghai Institute of Spacecraft Equipment, Shanghai 200240, China.

Zitieren

APA

Yuan, S., Song, B., Liu, G., Yang, B., Dai, M., Gao, Z., Cao, S., & Zhao, M. (2024). Enhanced Compressive Mechanical Properties of Bio-Inspired Lattice Metamaterials with Taper Struts. Materials, 18(1), 29. https://doi.org/10.3390/ma18010029

Vancouver

Yuan S, Song B, Liu G, Yang B, Dai M, Gao Z, et al. Enhanced Compressive Mechanical Properties of Bio-Inspired Lattice Metamaterials with Taper Struts. Materials. 2024;18(1):29. doi:10.3390/ma18010029

BibTeX
@article{Yuan2024,
  author = {Yuan, Shuangyin and Song, Bingke and Liu, Gang and Yang, Biqi and Dai, Mingqiu and Gao, Zetian and Cao, Shan and Zhao, Miao},
  title = {Enhanced Compressive Mechanical Properties of Bio-Inspired Lattice Metamaterials with Taper Struts},
  journal = {Materials},
  year = {2024},
  volume = {18},
  number = {1},
  pages = {29},
  doi = {10.3390/ma18010029}
}
Kostenlos starten →