EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Quantitative Characterization Model of Compressive Strength or Elastic Modulus of Recycled Concrete Based on Pore Grading

Fuwei Xu, Hongke Pan

Materials · 24.12.2024 · 18 (1) · 3

DOI: 10.3390/ma18010003 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.12.2024. Verfasst von Fuwei Xu und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Architecture and Engineering, Hubei University of Arts and Sciences, Xiangyang 441053, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program in Jiangxi Province in China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of different pore sizes on the compressive strength and elastic modulus of recycled concrete is an important issue in the academic circle. Aiming at this problem, a quantitative characterization model of the compressive strength and elastic modulus of recycled concrete based on pore grading was established in this paper. The compressive strength, elastic modulus, porosity and distribution of pore size of recycled concrete were measured by a concrete test and nuclear magnetic resonance technology, and the influences of different pore sizes on the compressive strength and elastic modulus of recycled concrete were analyzed, and the rationality of the quantitative characterization model was verified. The results showed that the compressive strength and elastic modulus of recycled concrete decreased with the increase in the recycled coarse aggregate replacement rate, and the decrease was more obvious with the increase in the substitution rate. The peak pore diameter in the distribution curve of porosity and pore diameter of recycled concrete increased, and the proportion of pore diameter above 50~200 nm and 200 nm also increased. The pore sizes, including those below 20 nm and 20~50 nm, had a positive correlation with the compressive strength and elastic modulus of recycled concrete, while the pore sizes, including those above 50~200 nm and 200 nm, had a negative correlation with the compressive strength and elastic modulus of recycled concrete. The test results of recycled concrete verify that the quantitative characterization model could better characterize the compressive strength and elastic modulus of recycled concrete.

Schlagwörter

Stichwörter der Autor:innen

compressive strengthelastic moduluspore gradingquantitative characterization modelrecycled concrete

Autor:innen und Institutionen

  • School of Architecture and Engineering, Hubei University of Arts and Sciences, Xiangyang 441053, China.
  • College of Architecture and Engineering, Xinyu University, Xinyu 338004, China.

Förderung

  • Key Research and Development Program in Jiangxi Province in China

Zitieren

APA

Xu, F., & Pan, H. (2024). Research on Quantitative Characterization Model of Compressive Strength or Elastic Modulus of Recycled Concrete Based on Pore Grading. Materials, 18(1), 3. https://doi.org/10.3390/ma18010003

Vancouver

Xu F, Pan H. Research on Quantitative Characterization Model of Compressive Strength or Elastic Modulus of Recycled Concrete Based on Pore Grading. Materials. 2024;18(1):3. doi:10.3390/ma18010003

BibTeX
@article{Xu2024,
  author = {Xu, Fuwei and Pan, Hongke},
  title = {Research on Quantitative Characterization Model of Compressive Strength or Elastic Modulus of Recycled Concrete Based on Pore Grading},
  journal = {Materials},
  year = {2024},
  volume = {18},
  number = {1},
  pages = {3},
  doi = {10.3390/ma18010003}
}
Kostenlos starten →