EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of the Strain Rate on Texture Formation During the Plane Strain Compression of AZ80 Magnesium Alloy

Yebeen Ji, Jimin Yun, Kibeom Kim iD, Tae Hee Lee iD, Kwonhoo Kim iD

Materials · 23.12.2024 · 17 (24) · 6292

DOI: 10.3390/ma17246292 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.12.2024. Verfasst von Yebeen Ji und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Marine Design Convergence Engineering, Pukyong National University, 45 Yongso-ro, Nam-gu, Busan 48513, Republic of Korea. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute for Advancement of Technology, Korea Institute for Advancement of Technology (KIAT) grant funded by the Korean Government (MOTIE).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Controlling microstructure and texture development is a key approach to improving the formability of magnesium alloys. In this study, the effects of the strain rate and initial texture on the texture evolution of magnesium alloys during high-temperature processing are investigated. The plane strain compression of three types of AZ80 magnesium alloys with different initial textures was assessed at 723 K and a train rate of 0.0005 s−1. Work softening was consistently observed in the stress–strain curves of all samples. However, the peak stress varied depending on the initial texture, with lower peak stress observed under conditions favoring prismatic slip. Under these conditions, the activation of non-basal slip suppressed the formation of basal texture. The texture shifted and developed parallel to the transverse direction when prismatic slip was dominant. In contrast, the activation of pyramidal slip led to the formation of a basal texture tilted by 25° from the (0001) plane. The effects of recrystallization and grain boundary migration on texture development were minimal. This study contributes to understanding the texture development mechanisms in magnesium alloys and provides insights into improving their workability and ductility through texture modification.

Schlagwörter

Stichwörter der Autor:innen

magnesium alloyplan strain compressionstrain ratetexture

Autor:innen und Institutionen

  • Department of Marine Design Convergence Engineering, Pukyong National University, 45 Yongso-ro, Nam-gu, Busan 48513, Republic of Korea.
  • Department of Advanced Materials Science, Graduate School of Frontier Sciences, The University of Tokyo, 5-1-5, Kashiwanoha, Kashiwa-shi, Chiba 277-8561, Japan.
  • Premium Vehicle R&D Center, Jeonnam Division, Korea Automotive Technology Institute, 46, F1-ro, Samho-eup, Yeongam-gun, Cheonan 58463, Republic of Korea.
  • Department of Metallurgical Engineering, Pukyong National University, 45 Yongso-ro, Nam-gu, Busan 48513, Republic of Korea.

ORCID-Profile: Kibeom Kim, Tae Hee Lee, Kwonhoo Kim

Förderung

  • Korea Institute for Advancement of Technology
  • Korea Institute for Advancement of Technology (KIAT) grant funded by the Korean Government (MOTIE)

Zitieren

APA

Ji, Y., Yun, J., Kim, K., Lee, T. H., & Kim, K. (2024). The Influence of the Strain Rate on Texture Formation During the Plane Strain Compression of AZ80 Magnesium Alloy. Materials, 17(24), 6292. https://doi.org/10.3390/ma17246292

Vancouver

Ji Y, Yun J, Kim K, Lee TH, Kim K. The Influence of the Strain Rate on Texture Formation During the Plane Strain Compression of AZ80 Magnesium Alloy. Materials. 2024;17(24):6292. doi:10.3390/ma17246292

BibTeX
@article{Ji2024,
  author = {Ji, Yebeen and Yun, Jimin and Kim, Kibeom and Lee, Tae Hee and Kim, Kwonhoo},
  title = {The Influence of the Strain Rate on Texture Formation During the Plane Strain Compression of AZ80 Magnesium Alloy},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {24},
  pages = {6292},
  doi = {10.3390/ma17246292}
}
Kostenlos starten →