EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Properties of Sulfur-Modified Alite Calcium Sulfoaluminate Cement

Xiaodong Li iD, Guodong Kang, Shang Dou, Bing Ma, Jin Tang, Hao Zhou iD, Houhu Zhang, Jiaqing Wang iD, Xiaodong Shen

Materials · 21.12.2024 · 17 (24) · 6258

DOI: 10.3390/ma17246258 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.12.2024. Verfasst von Xiaodong Li und 8 weiteren Autor:innen. Beteiligte Einrichtung: Nanjing Institute of Environmental Sciences, Ministry of Ecology and Environment of the People's Republic of China, Nanjing 210042, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the financial support of the special fund project for the Special Fund of Chinese Central Government for Basic Scientific Research Operations in commonweal Res…, The Special Fund of Carbon Peak and Carbon Neutrality Research Institute supported by Nanjing Institute of Environmental Sciences, Ministry of Ecology and Envi…, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Alite calcium sulfoaluminate (ACSA) cement is an innovative and environmentally friendly cement compared to ordinary Portland cement (OPC). The synthesis and hydration of ACSA clinkers doped with gradient sulfur were investigated. The clinker compositions and hydrated pastes were characterized by X-ray diffraction (XRD), isothermal calorimetry, mercury intrusion porosimetry (MIP), and scanning electron microscopy (SEM) to analyze its mineral contents, hydration products, heat release, pore structure, and microstructure. The compressive strength and linear expansion of ACSA mortars were tested for their mechanical properties. Results showed that clinkers doped with 2 wt.% MgO can offset the hurdle that SO3 caused to the formation of C3S (tricalcium silicate). Clinkers with varying ratios of C3S and C4A3$ (calcium sulfoaluminate) were obtained, achieving 58–70% C3S and 2.0–5.6% C4A3$ in ACSA through adjusting the KH (lime saturation factor) values and SO3 dosage. ACSA cement showed better early mechanical properties. The 0.93 KH value with 3% SO3 dosage in the raw meal, which contains 63.9% C3S and 2.98% C4A3$ in the clinker, reached an optimal compressive strength level at 1d (26.35 MPa) and at 3d (39.41 MPa), marking 30.45% and 18.70% increases compared to PII 52.5. The excellent early strength of ACSA cement may offer promising applications t increasing the incorporation of supplementary cementitious materials, thereby reduce pollution and carbon emissions.

Schlagwörter

Stichwörter der Autor:innen

C4A3$ and C3S formationcement hydrationmineral designsulfur effects

Autor:innen und Institutionen

  • Nanjing Institute of Environmental Sciences, Ministry of Ecology and Environment of the People's Republic of China, Nanjing 210042, China.
  • State Key Laboratory of Materials-Oriented Chemical Engineering, College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China.
  • College of Civil Engineering, Nanjing Forestry University, Nanjing 210037, China.

ORCID-Profile: Xiaodong Li, Hao Zhou, Jiaqing Wang

Förderung

  • the financial support of the special fund project for the Special Fund of Chinese Central Government for Basic Scientific Research Operations in commonweal Res…
  • The Special Fund of Carbon Peak and Carbon Neutrality Research Institute supported by Nanjing Institute of Environmental Sciences, Ministry of Ecology and Envi…
  • National Key R&D Program of China
  • Special Fund of the Chinese Central Government for Basic Scientific Research Operations in the Commonwealth Research Institute
  • Special Fund of the Carbon Peak and Carbon Neutrality Research Institute
  • National Key R&D Program of China

Zitieren

APA

Li, X., Kang, G., Dou, S., Ma, B., Tang, J., Zhou, H., Zhang, H., Wang, J., & Shen, X. (2024). Preparation and Properties of Sulfur-Modified Alite Calcium Sulfoaluminate Cement. Materials, 17(24), 6258. https://doi.org/10.3390/ma17246258

Vancouver

Li X, Kang G, Dou S, Ma B, Tang J, Zhou H, et al. Preparation and Properties of Sulfur-Modified Alite Calcium Sulfoaluminate Cement. Materials. 2024;17(24):6258. doi:10.3390/ma17246258

BibTeX
@article{Li2024,
  author = {Li, Xiaodong and Kang, Guodong and Dou, Shang and Ma, Bing and Tang, Jin and Zhou, Hao and Zhang, Houhu and Wang, Jiaqing and Shen, Xiaodong},
  title = {Preparation and Properties of Sulfur-Modified Alite Calcium Sulfoaluminate Cement},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {24},
  pages = {6258},
  doi = {10.3390/ma17246258}
}
Kostenlos starten →