EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploring Metal–Metal Composites: A Study on AA5083 Matrix-Cr Particles Reinforced Composites

Serdar Özkaya iD

Materials · 20.12.2024 · 17 (24) · 6246

DOI: 10.3390/ma17246246 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.12.2024. Verfasst von Serdar Özkaya. Beteiligte Einrichtung: Faculty of Engineering, Metallurgical and Materials Engineering, Karadeniz Technical University, 61080 Trabzon, Turkey. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this study is to develop chromium-reinforced metal–metal composites utilizing an AA5083 aluminum alloy matrix through powder metallurgy while also examining their properties. Samples were produced by incorporating varying quantities of chromium (5%, 10%, and 15% by weight) into the AA5083 matrix. In order to ensure a uniform distribution of chromium particles, the powders were blended in a ball mill and subsequently hot-pressed at 500 °C under 500 MPa for a period of two hours in an argon atmosphere. The resulting samples were subjected to analysis in order to determine the effect of chromium content on the composites, with particular attention being paid to their microstructure, hardness, density, tensile properties, tribological performance and corrosion resistance. The findings demonstrated that an elevated chromium concentration markedly augmented the hardness of the composite, exhibiting a 50% enhancement in the 15 wt.% Cr composite. A 30% reduction in wear loss was observed for the same sample. The A10 sample (10 wt.% Cr) exhibited the greatest corrosion resistance, although this declined in the A15 sample due to increased porosity. Tensile strength increased by up to 10 wt.% Cr before decreasing at 15 wt.% Cr, which was also attributed to porosity. These findings demonstrate that chromium reinforcement enhances the mechanical and tribological performance of AA5083 composites, rendering them suitable for applications requiring high hardness and wear resistance.

Schlagwörter

Stichwörter der Autor:innen

AA5083chromiummetal matrix compositesmillingpowder metallurgy

Autor:innen und Institutionen

  • Faculty of Engineering, Metallurgical and Materials Engineering, Karadeniz Technical University, 61080 Trabzon, Turkey.

ORCID-Profile: Serdar Özkaya

Zitieren

APA

Özkaya, S. (2024). Exploring Metal–Metal Composites: A Study on AA5083 Matrix-Cr Particles Reinforced Composites. Materials, 17(24), 6246. https://doi.org/10.3390/ma17246246

Vancouver

Özkaya S. Exploring Metal–Metal Composites: A Study on AA5083 Matrix-Cr Particles Reinforced Composites. Materials. 2024;17(24):6246. doi:10.3390/ma17246246

BibTeX
@article{zkaya2024,
  author = {Özkaya, Serdar},
  title = {Exploring Metal–Metal Composites: A Study on AA5083 Matrix-Cr Particles Reinforced Composites},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {24},
  pages = {6246},
  doi = {10.3390/ma17246246}
}
Kostenlos starten →